For info:
UTREC NUMBER: 352 MANUFACTURER: LIVERNOIS AGE: 1985 SPECIFICATIONS: Maximum Tube Diameter: 1" (25.4 MM) Minimum Tube Diameter: 1/2" (12.7 MM) Maximum Wall Thickness: .043" (1.09 MM) Minimum Wall Thickness: .009" (.23 MM) Maximum Mill Speed: 442 FPM (135 MPM) Roll Space Forming: 3" (76.2 MM) Roll Space Fin & Sizing: 3" (76.2 MM) Driven Spindle Diameter: 1-1/2" (38.1 MM) Hand of Operation: Left to Right ENTRY EQUIPMENT: 2 - Single Uncoilers 1,500 Lb. Uncoiler, Pneumatic Brake 1 - Shear End Welder, Guild DMA 100-3, Manual Clamp, Hyd. FORMING MILL: 1 - Entry Guide Unit 4 - Driven Breakdown Stands 1 - Driven Fin Stand 1 - Operator Control Station WELDING STATION: 1 - Seam Guide Lead Roll 2 - Weld Pressure Units 2 - Single Scarfing Stands 1 - Bead Winder 1 - No Welder included 1 - Weld Checker SIZING MILL: 1 - Caterpillar Type Pull Out Station 1 - Driven Pre-Oval Pass 3 - Pass Ovaling Section - Powered 3 - Pass Sizing Section - Powered 3 - Pass Edge Sizing Section - Powered CUT-OFF: 1 - Livernois Flying Cut-Off System MILL DRIVE: 50 HP DC Reliance Solid State AC to DC Converter DRAWINGS: 1 - Complete Set of Electrical and Mechanical Drawings. All Necessary Installation Drawings. 1 - All Necessary Catalogs For All Equipment Purchased With This Line. TOOLING: Round .431" SPEED: 400 FPM CONDITION: Very Good NOTE: This Machine Manufactured a Radiator Tube With The Outside Dimensions of .110" x .635" With a Wall Thickness of .016" at 400 FPM.