36" x 4.125" x 8,000 Lb. RUESCH, 16" Coil I.D., 72" Coil O.D., .015"-.125" Gauge Range

UTREC NUMBER:  859
MANUFACTURE:   RUESCH
RUESH I.D.:	   N#2236
MODEL NUMBER:  146
SERIAL NUMBER: 5552

SPECIFICATIONS:

Gauge Range:        .015" - .125"
Max. Width:         36"
Coil I.D.:          16"
Max. Coil O.D.:     72"
Max. Coil Weight:   8,000 Lb. on 16" O.D. Drum

Slitter Drive:
 EATON Adjusto-Spede Model MD 21002-0905
 10 HP With Clutch/Brake
 Timing Belt Drive Output to Slitter Input Shaft: Max. RPM 1700
                                                  Min. RPM 100
                                                  220/440 Volts
NOTE: Currently Set Up With Stripper Rings, Readily Convertible To A
      Ring Slitter.  Entry and Exit Pass-Line Rolls Attached to Base.

Overall Slitter Dimensions:	7' W x 10' L x 6' High

Scrap Winders:
 (2) Free Standing Units W/Hydraulic Drives
 Spool Size: 30" O.D. x 16" I.D. x 12" Width of Traverse w/Guide Rings

Hydraulic Power Supply:	
 RELIANCE 10 HP 230/460 Volts
 RACINE Hydraulic Pump Type PSV-PSSO HRL-12
 30 Gal. Reservoir Free Standing

Recoiler:
 16" O.D. x 42" Face Solid Drum w/Starter Slots
 Drive: EATON Type COGX
        50 HP 220/440 Volts
        EATON Dynaspede Clutch/Brake Coupled to JONES Reducer Ratio 18:1
        Input RPM 1750H
        Hydraulic Coil Push Off
        Recoiler Mounter Over Arm Seperator
Overall Recoiler Dimension:	6' W x 10' L x 6' High

Line Control:
 Cabinet Mounted EATON DYNAMATIC Eddy Current Control
  w/Door-Mounted Dis-Connect
NOTE: Existing Control Should Be Replaced With New Solid State Control.