51" x .080" WILHELMSBURGER, 10' Max. Cut Length, Entry Pinch Rolls, 1972

UTREC NUMBER:  1126
MANUFACTURER:  WILHELMSBURGER
AGE:           1972

SPECIFICATIONS:

Maximum Width:        51" (1300 mm)
Minimum Width:        16" (400 mm)
Gauge Thickness:      .080" (2.00 mm)
Line Speed:           96 FPM (30 M/Min.)
Maximum Cut Length:   10' (3 M)

EQUIPPED WITH:
  Entry Pinch Rolls
    Hydraulically Operated Entry Pinch Rolls Backed Up Over 2 Flights

  Edge Trimmer
    Width:            16" - 52" (400 mm - 1300 mm)
    Arbor Diameters:  3.15" (80 mm)
    Cutter Detail:    7.87" x .80" (200 mm x 20 mm)
    Speed:            96 FPM (30 M/Min.)
    Gauge:            .020" - .080" (0.63 mm - 2 mm)

  Twin Rotary Chopper

  Scrap Conveyor to Discharge

  Leveler:
    Type:                8 Roll ( 4 over 4)
    Work Roll Dia.:      2.25" (55 mm)
    Back Ups:            3 Flights Top and Bottom
    Electric Screwdowns:	
    Driven Pinch Rolls:  5-1/2" (140 mm) Dia. Entry and Exit
	                     Hydraulically Operated and Backed Up 
                         Over 2 Flights
	
  Flying Shear:
    Fully Automatic Upcut Flying Shear Matched to Leveller
    Capacity:     .080" (2 mm)

  Exit Equipment:
    2 Off Belt Conveyor Tables Each 3 M Long Feed to
    Magnetic Stacking Roller Track
    Scissor Lift Pack Stacking Table 79" x 8,800 Lbs. (2000 mm x 4000 kgs)
    10' (3 M) Pack Discharge Table

  Electricals:
    Dedicated Modern Electrical Control Gear Offering All the Facilities of
    a Fully Automated Cut-to-Length.

  WILHELMSBURGER Sheet Leveler
    21 Roll Precision Sheet Leveller
    Backed Up Over 5 Flights Top & Bottom
    Roll Face Width:          46.8" (1875 mm)
    Process Width:            44.5" (1750 mm)
    Maximum Capacity:         38" (1.5 mm)
    Work Roll Diameter:       1.38" (35 mm)
    Line Speed:               13 - 42 M/Min.
    Screwdown:                Manual c/w DTI Readouts
    Back Up Rolls Adjustment: Manual to All Bottom Flights
    Main Drive:               22 Kw, 1460 RPM
    Pass Line Height:         1225 mm
    Full Roll Banking & Tilting Facility in 2 Sections Over 3 Sets of
     Work Rolls and 8 Sets of Work Rolls Respectively.

  All Rolls & Bearings Piped for Forced Lubrication.

NOTE:  NO UNCOILER IS INCLUDED IN THIS LINE