6" X .120" ABBEY ETNA, 2-1/2" Driven Spindle Diameter, 21" Forming Roll Space, 8" Sizing Roll Space

UTREC NUMBER:   1306
MANUFACTURER:   ABBEY ETNA MACHINE CO.
MODEL:          6 SXU
SERIAL NUMBER:  10680-11366-11925
AGE:            1957 - 1966 - 1979

SPECIFICATIONS:
  Max. Tube Diameter:              6" (152 mm) 
  Min. Tube Diameter:              1.900" (48.2 mm)
  Max. Wall Thickness:             .120" (3 mm)
  Min. Wall Thickness:             .042" (1.1 mm)
  Max. D/T Ratio:                  60:1
  Min. D/T Ratio:                  10:1
  Max. Material Yield:             50,000 PSI
  Max. Mill Speed:                 200 FPM  (60 MPM)
  Roll Space (Width) Forming:      21" (533 mm)
  Roll Space (Width) Fin & Sizing: 8" (203 mm)
  Driven Spindle Diameter:         2-1/2" (63.5 mm)
  Gear Box Data:                   ABBEY 4K, 15:1 Ratio
  Roll Root Diameter:              5.425" (138 mm)
  Hand of Operation:               Left to Right

ENTRY EQUIPMENT:
  No Entry Equipment

FORMING MILL:
  1- Entry Guide Unit With Edge Condition Tools
  4- Driven Breakdown Stands
  4- Idle Side Roll Units
  2- Driven Fin Stands

WELDING SECTION: 
  No Welder
  1- Roll Weld Pressure Unit, 2 Roll - High Frequency
  1- Scarfing and Seam Ironer Unit
  1- Bead Winder

COOLANT SECTION:
  Not Included

SIZING MILL:
  4- Driven Sizing Stands
  4- Idle Side Roll Units
  2- Straightener Unit (Modified Turkshead)

CUT-OFF PRESS:
  No Cut-Off

ELECTRICAL:
  No Drive System

MOTORS:
  Forming: 75 HP, DC 1150/2000
  Sizing:  75 HP, DC 1150/2000
NOTE: Motors Have DRIVE ALL 4 Speed Shift Boxes With The Following Ratios:
      2.66:1 = 40 FPM @ 1100 RPM
      2.00:1 = 54 FPM @ 1100 RPM
      1.27:1 = 85 FPM @ 1100 RPM
      .941:1 = 115 FPM @ 1100 RPM
      .941:1 = 200 FPM @ 2000 RPM

TOOLING SIZES: 
  4-1/2" (114.3 mm) On The Mill

CONDITION: GOOD