YODER M1-1/2 Tube Mill Line

UTREC NUMBER:  1433
MANUFACTURER:  YODER
MODEL NUMBER:  M1-1/2
AGE:

SPECIFICATIONS:
Hand of Operation:         Right to Left

Maximum Tube Diameter:     1-1/4" (32 mm)
Minimum Tube Diameter:     1/4" (6.3 mm)
Maximum Wall Thickness:    .049" (1.2 mm)
Minimum Wall Thickness:    .018" (.45 mm)
Maximum Line Speed:        100 FPM (30 MPM)
Maximum D/T Ratio:         60:1
Minimum D/T Ratio:         10:1
Maximum Material Yield:    50,000 PSI

GEAR BOX DATA:
  Spindle Diameter:               1-1/2" (38 mm)
  Roll Space Forming:             8" (203 mm)
  Roll Space Fin & Size:          8" (203 mm)
  Forming Horizontal Centers:     Passes 1 - 3:  15-1/4"
                                  Passes 3 - 4:  17"
  Fin/Sizing Horizontal Centers:  Passes 1 - 2:  15-1/4"
                                  Passes 2 - 3:  17"

ENTRY EQUIPMENT:
1 - LITTELL 4,000 Lb. Single Uncoiler
  I.D.:  14" - 18"
  Width: 18" Max.
1 - GUILD Shear End Welder

FORMING MILL:
Entry Guide w/2 Edge Trimmers
4 - Driven Breakdown Stands
4 - Idle Side Rolls
3 - Driven Fin Stands
3- Idle Side Rolls

WELDING SECTION:
1 - Seam Guide
1 - Adj. Idle Side Roll
1 - 2 Roll Weld Pressure
1 - Idle Stand
1 - 6' Coolant Section
1 - 125 KVA Rotary Resistance Welder

SIZING MILL:
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - Straightener

CUT OFF:
1 - YODER P-50 Flying Cut Off, 4 Post Single Cut Die Set
	Serial Number:	Y 6036-171
1 - 20' Runout Table - Single Dump

MILL DRIVE:
1 - Forming Motor, 7.5 HP, 1170 RPM, 220/440/3/60
1 - Sizing Motor, 7.5 HP, 1170 RPM, 220/44/3/60

1 - Electrical Cabinet

Tooling:  5/8" Round (On Mill), 1-set 1/2" Round Complete