7" YODER #W-45 H.F. Tube Mill Line

UTREC NUMBER:  1484
MANUFACTURER:  YODER
MODEL NUMBER:  W-45

PRELIMINARY SPECIFICATIONS:

Maximum Tube Diameter:      7" (177.8 mm)
Minimum Tube Diameter:      2.375" (60.3 mm)
Maximum Wall Thickness:     .320" (8.1 mm)
Minimum Wall Thickness:     .065" (1.6 mm)
Maximum D/T Ratio:          60:1
Minimum D/T Ratio:          10:1
Maximum Material Yield:     50,000 PSI
Maximum Mill Speed:         150 FPM (45.7 MPM)
Roll Space Forming:
Roll Space Fin & Sizing:
Driven Spindle Diameter:    5-1/2" (139.7 mm)
Hand of Operation:          Left to Right


ENTRY EQUIPMENT:
  Edge Trim Table
  Enter Stock Guide Table

FORMING MILL:
  4 - Driven Breakdown Stands
  3 - Idle Side Roll Units (Between Driven Stands)
  2 - Idle Side Roll "Cluster"
  3 - Driven Fin Stands
  2 - Idle Side Roll Units (Between Driven Stands)

WELDING SECTION:
  1 - Seam Guide Stand
  1 - 4-Roll Weld Pressure Unit
  2 - Scarfing Units
  2 - Bead Winders
  2 - Driven Pullout Stands

COOLANT SECTION:
  No Included

SIZING MILL:
  3 - Driven Sizing Stands w/Single Point Adjustment (No Base), Driven Squaring
  1 - Turkshead, 4-Roll Single Plane

CUT OFF:
  1 - Traveling Rotary Cut Off w/Rack & Pinion Carriage
  1 - TALLYRAND Length Control System
  1 - Spare Accelerator Cylinder

ELECTRICAL:
  No Drive System

TOOLING:
  2-3/8", 2-7/8", 3-1/2", 4", 4-1/2", 5-1/2", 5-9/16", 6-5/8", 7"
  34 - Breakdown Tooling Shafts w/Bearing Blocks
  66 - Fin Pass Tooling Shafts w/Bearing Blocks
Complete Drawings

Many Spare Parts