UEDA SEISAKUSHO Slitting Line

UTREC NUMBER:    1532
MANUFACTURER:    UEDA SEISAKUSHO
AGE:             1970
SPECIFICATIONS:

Size range:             Up to 1524mm Coil Width
                        Up to 6mm Strip Thickness
Line speed:             Max. 60-120m/min
Type:                   Pull-through Slitting

UNCOILER:
  Coil Car:
   Type:              4 Wheel Carriage, Hydraulic Drive
   Capacity:          20 Metric Ton
   Transfer:          3900mm
   Vertical:          750mm
   Receiving Surface: V-form

  Uncoiler:
   Type:              Single Mandrel
   Drum Diameter:     Contracted 580mm (732mm with pads)
                      Expanded 640mm (792mm with pads)
   Expansion:         Hydraulic
   Feed:              Electric Motor with Brake, also Air Brake

  Snubber:
   Type:              Pneumatic
   Roll Dimension:    200mm Diameter, 600mm Width
   Drive:             Electric

  Peeler:
   Type:              Hydraulic
   Knife Expansion:   550mm Max
   Knife Vertical:    150mm

PINCH ROLL WITH ROUGH LEVELLER:
  Hydraulically Operated with Geared Electrical Motor and Brake

SHEAR:
  Hydraulic Shear Cylinder
  Knife Dimensions:   30mm x 100mm x 1750
  Rake Angle:         1/40

SCRAP CHOPPER:
  Type:               Rotary Drum
  Knife Width:        300mm
  Configuration:      6 Knives/Rotor, 4 Sets
  Motor:              37kW DC

SLITTER:
  Knife Dimensions:   20mm Thick x 400mm Diameter
  Knife Change:       Electrical Transfer
  Guide Table:        Roller Type, 3370mm Long

RECOILER:
  Loop Table:         Pneumatic with Basket Roll
  Separator 200mm dia x 5mm thick
  Tension Pad:        Hydraulic with Pneumatic Deflector Roll
  Recoiler:           Single Mandrel
  Expanded:           610mm
  Contracted:         560mm
  Winding Speed:      60-120m/min
  Main Motor:         90kW DC, 400-1600 rpm
  Coil Car:           4 Wheel Carriage, Hydraulic Drive
  Capacity:           20 Metric Tons