3" X .125" ABBEY ETNA #2K H.F. Tube Mill

UTREC NUMBER:  1548
MANUFACTURER:  ABBEY ETNA
MODEL NUMBER:  2K

SPECIFICATIONS: MILL ONLY

  Max. Tube Diameter:        3" (76.2 mm) 
  Min. Tube Diameter:        .500" (12.7 mm)
  Max. Wall Thickness:       .125"  (3.2 mm)
  Min. Wall Thickness:       .018"  (0.5 mm)
  Max. D/T Ratio:            60:1
  Min. D/T Ratio:            10:1
  Max. Material Yield:       50,000 PSI
  Max. Mill Speed:           350 FPM  (106 MPM) Gear in Speed
  Driven Spindle Diameter:   2.0" (50.8 mm)
  Hand of Operation:         Right to Left

FORMING MILL
  3- Driven Breakdown Stands
  5- Idle Side Roll Units, with Height Adjustment (Addison)
  3- Driven Fin Stands
  3- Idle Side Roll Units, with Height Adjustment (Addison)

WELDING SECTION 
  Note: No Weld Pressure Unit is included with this quotaion.
  1- Dual Scarfing Unit
  1- Bead Winder

SIZING MILL
  3- Driven Sizing Stands
  3- Idle Side Roll Units, with Height Adjustment (Addison)
  2- Driven Squaring Stands
  1- 8-Roll Straightener Unit (Modified Turkshead)

MILL PASS ARRANGEMENT
  1- Driven Breakdown                   14- Weld Pressure
  2- Idle Side Roll                     15- Scarfing
  3- Driven Breakdown                   16- Idle Side Roll
  4- Idle Side Roll                     17- Driven Sizing
  5- Driven Breakdown                   18- Idle Side Roll
  6- Idle Side Roll                     19- Driven Sizing
  7- Idle Side Roll                     20- Idle Side Roll  
  8- Idle Side Roll                     21- Driven Sizing
  9- Driven Fin Stand                   22- Driven Squaring
  10-Idle Side Roll                     23- Driven Squaring
  11- Driven Fin                        24- Idle Straightener (Modifided
  12- Idle Side Roll                                            Turkshead)
  13- Driven Fin
  14- Idle Side Roll

DRIVE MOTORS
  1- 60 H.P. D.C. Forming Motor
  1- 60 H.P. D.C. Fin Motor
  1- 60 H.P. D.C. Sizing Motor 

Spare parts:  Aprox. 25 New Drive Sprindles, Worm Gears, Side Roll Spindles, Drive Shafts