2-1/2" x .095" YODER #M2, H.F., 2" Spdl. Dia., Dbl. Unc., Flying C/O, 20' Run-Out-Dump Table

UTREC NUMBER:   1556
MANUFACTURER:   YODER
MODEL NUMBER:   M2
AGE:

PRELIMINARY SPECIFICATIONS:
Hand of Operation:          Right to Left
Maximum Tube Diameter:      2-1/2" (63 mm)
Minimum Tube Diameter:      1/2" 
Maximum Wall Thickness:     .095" (2.4 mm)
Minimum Wall Thickness:     .020" 
Maximum Line Speed:         180 FPM (Gear In)
Maximum D/T Ratio:          60:1
Minimum D/T Ratio:          10:1
Maximum Material Yield:     50,000 PSI

GEAR BOX DATA:
  Spindle Diameter:         2" (50 mm)
  Roll Space Forming:       12" (203 mm)
  Roll Space Fin & Size:    8" (203 mm)
  Horizontal Centers:       11" (279.4 mm)

ENTRY EQUIPMENT:
1 - 4,000 Lb. LITTEL #40-18 Double Uncoiler
    Electrical Brakes, Manual Expansion
1 - GUILD #DM109 Shear End Welder, 200 Amp Hand Held Torch
    S/N: 6302-10
1 - LOOPCO 4 Stand Overhead Looping System
    S/N: 528
    2 H.P. RELIANCE Winch Drive

FORMING MILL:
1 - Entry Guide Table
3 - Driven Breakdown Stands
4 - Idle Side Rolls
3 - Driven Fin Stands

WELDING SECTION:
1 - 3 Roll ERW Weld Pressure
1 - Thermatool Model VT-100, 100 Kw H.F. Welder, Ceramic Capacitors
1 - Scarfing Stand, Tandem Tools w/Bead Scarf Winder
Coolant Section - Flood Type

SIZING MILL:
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - Straightener, Turkshead 8-Roll Reshaping, 2-Plane

CUT OFF:
1 - YODER P-40 Flying Cut Off w/Accelerator 
1 - 20' Run-Out-Dump Table

MILL DRIVE:
1 - 30 H.P.,  A.C. Varidrive, 440/60/3


Tooling to Produce the Following Sizes:
  1-3/8", 1-1/2", 1-5/8,1-3/4",2", 2-1/4", 2-1/2"
  Round, Some Square & Rectangle
  2" Square (NEW) On Mill
  Tooling Should Be Inspected For Completeness.

Condition:	Very Good As Taken From Service.

Complete Electrical and Mechanical Drawings