3/4" x .050" TUREK & HELLER #WU-11 Tube Mill

UTREC NUMBER:  1569
MANUFACTURER:  TUREK & HELLER
MODEL NUMBER:  WU-11
SERIAL NUMBER:
AGE:

SPECIFICATIONS:
Maximum Tube Diameter:    3/4" (19mm)
Minimum Tube Diameter:    .150" (3.81mm)
Maximum Wall Thickness:   .050" (1.27mm)
Minimum Wall Thickness:   .010"  (0.25mm)
Material:                 All TIG Weldable Alloys
Roll Space:               3"
Driven Spindle Diameter:  1.125"
Roll Root Diameter:       2.250"
Hand of Operation:        Right to Left
Line Speed:               24 Feet Per Minute, Gear In

FORMING MILL:
  1 - Strip Entry Guide
  4 - Driven Breakdown Stands
  3 - Idle Side Roll Units
  3 - Driven Fin Stands
  3 - Idle Side Roll Units

WELDING SECTION:
  Weld Pressure Unit
    4-Roll Type
    Cyclomatic Arc Control
    Atmosphere Enclosure (Argon-Helium)
   Welder
    MILLER HF-20-1WG Arc Starter
    MILLER Gold Star 600 SS Welder
    Coolant Zone
    Air Cooling

SIZING MILL:
  2 - Idle Sizing/Support Stands
  1 - Dual Head Bead Flash Grinder
  1 - Tranducer Wheel
  3 - Driven Sizing Stands
  4 - Idle Side Roll Units
  1 - 2-Roll Turkshead

FLYING ABRASIVE CUT OFF SAW:
  Saw Blade Diameter: 10"
  Saw Air Actuator
  Saw Motor: 5 HP, 230-460/3/60, 1745 RPM
  Air Cylinder Accelerator
  Air Tube Clamps
  36" Travel
  20' Runout Table

MILL DRIVE:
  2 - 5 HP DC Motor, 480 Volt
  RELIANCE Variable Speed Drive Control Cabinet

TOOLING:
  7/16" (11.1 mm) On Mill
  Misc. Other Sets, to be confirmed.

Condition:  Good As Taken From Service