1" (25.4mm) x .050 (1.27 mm) T & H w/In-Line Annealing

UTREC NUMBER:  1610
MANUFACTURER:  TUREK & HELLER
MODEL NUMBER:  WU-11-12
SERIAL NUMBER: 1230
AGE:           1991

SPECIFICATIONS:
Maximum Tube Diameter:    1" (25.4mm)
Minimum Tube Diameter:    .188" (4.7mm)
Maximum Wall Thickness:   .050" (1.27mm)
Minimum Wall Thickness:   .010"  (0.25mm)
Material:                 All TIG Weldable Alloys
Roll Space:               4" (101.6mm)
Driven Spindle Diameter:  1.125" (28.5mm)
Roll Root Diameter:       2.250" (57.1mm)
Hand of Operation:        Left to Right
Line Speed:               40 Feet Per Minute, Gear In

ENTRY:
 1 - Driven 2,200 Lb. Uncoiler
      Mfg.: PRE
      Model: #12-2-500
      S/N:   0996-078

FORMING MILL:
  1 - Strip Entry Guide
  4 - Driven Breakdown Stands
  3 - Idle Side Roll Units
  3 - Driven Fin Stands
  3 - Idle Side Roll Units

WELDING SECTION:
  Weld Pressure Unit - 4 Roll
    Cyclomatic Arc Control
    Atmosphere Enclosure (Argon-Helium)
  INTELLITIG 40 Welder
  Coolant Zone
  2 - COOLMATE Cooling Units

SIZING MILL:
  1 - Dual Head Bead Flash Grinder
  1 - Tranducer Wheel
  3 - Driven Sizing Stands
  4 - Idle Side Roll Units
  1 - 2-Roll Straightener

BRIGHT TUBE ANNEALING SYSTEM, 1996:
 1 - TERMOMACCHINE 100KW
      Model TERMOTEK No. 70.100.06
      S/N: 1000
     With EVAPCO Closed Loop Cooling System

PULL OUT:
 2 - Driven Stands
 3 H.P. D.C. Drive System

FLYING ABRASIVE CUT OFF SAW w/Digital Length Control System:
  Saw Blade Diameter: 8"
  Saw Motor: 2 HP
  D.C. Accelerator System, RELIANCE Flex Pak
  36" Travel
  20' Runout Table

MILL DRIVE:
  2 - 7-1/2 HP DC Motor, Forming/Sizing
  RELIANCE Max Pak III D.C. Drive System
  RELIANCE Automate Programable Controller
 1 - 3 H.P. D.C. Motor, 2 Stand Pull-Out

TOOLING:
 1 - Set of Rolls - .750" (19.05mm) on the Mill

Condition:  Good As Taken From Service