LEBLOND 16" HEAVY DUTY SLIDING GAP BED LATHE

1-USED LEBLOND 16" HEAVY DUTY SLIDING 
  BED GAP LATHE
  MACHINE SERIAL NUMBER 2NE-530
  APPROX. DATE OF MFG.
  STK# 102083
=============================================
SPECIFICATIONS SUBJECT TO VERIFICATION:

CAPACITY;
SWING OVER BED AND CARRIAGE WAYS 20.5"
SWING OVER COMPOUND REST 12 7/8"
SWING OVER GAP 46"
CENTER DISTANCE 72"
MAX CNETER DISTANCE BED OPEN 120"
SIZE OF TOOL HOLDER 5/8" X 1 3/8" #4 TOOL BLOCK

HEAD STOCK;
SPINDLE SPEEDS (27) SELECTIONS 16 TO 2,000 RPM
  LOW SPEED 16 TO 71 RPM
  MEDIUM 88 TO 394 RPM
  HIGH 450 TO 2000 RPM
SPINDLE BEARINGS (3)
SPINDLE NOSE, TAPER KEY, DRIVE SIZES L1
LENGTH ON BED 30 3/4"

BED;
LENGTH STANDARD 10'11"
WIDTH ACROSS WAYS 16 15/16"
DEPTH 14 3/8"

CARRIAGE;
LENGTH ON WAYS 30 7/8"
BEARING SURFACE SQ. INCHES 140
CROSS SLIDE TRAVEL 20"
COMPOUND REST TRAVEL 4 1/2"
BRIDGE WIDTH 9"
FEEDS-THREADS;
FULL LENGTH LEAD SCREW THREDING
FEED CHANGES (60)
RANGE IN GEAR DRIVE .0034 TO .205 IPR
RANGE IN BELT DRIVE .0011 TO .0675 IPR
THREAD CHANGES (60)
THREADS PER INCH 2 TO 120 TPI
LEAD SCREW DIAMETER AND THREADS PER INCH 1 7/16" X 4 TPI

TAILSTOCK;
SPINDLE DIAMETER 3 5/8"
CENTER, MORSE TAPER NO. 4
SPINDLE TRAVEL AND SET-OVER, RIGHT OR LEFT 11", 1"
LENGTH ON WAYS 15"

EQUIPPED WITH:
2 SPEED MAIN MOTOR
 7.5HP/15HP
 890/1760 RPM
GUSHER COOLANT PUMP
TAPER ATTACHMENT
TAILSTOCK
18" 4 JAW CHUCK
15" 3 JAW CHUCK
6.5" ROLLER BEARING 3 PT STEADY REST
11.5" ROLLER BEARING 3 PT STEADY REST
17" ROLLER BEARING 3 PT STEADY REST
12" FACE PLATE
17" FACE PLATE
24" FACE PLATE
38" FACE PLATE
HEAVY DUTY 2 DRAWER TOOL STORAGE RACK
HARDENED AND GROUND UPPER BED WAYS
FLAKED SOFT LOWER BED WAYS

OVERALL DIMENSIONS 6'2" F-B X 16'10" WITH BED EXTENDED
        WITHOUT BED EXTENDED 12'10" X APPROX 56" TALL

APPROX WIEGHT WITH TOOLING 10,600 LBS.

www.rabind.com