For info:
ONE - USED WAGNER FULLY AUTOMATIC SAW FOR NON-FERROUS METALS WITH HEAVY DUTY BUNDLE LOAD MAGAZINE MODEL WAM-90 YEAR: 1995 STOCK NO: 5290 Saw Specifications: Capacity: Round: 3-1/2" maximum - 5/8" minimum Square: 3-1/8" Rectangles: 4-1/2" x 3-1/8" Blade diameter: 315mm x 2.0 mm x 32 mm Cutting speeds: 900/1800 rpm Sawblade motor: 2/4 HP Automatic feed: Maximum 12" cut-off length - minimum 3/8" Feed speed: Infinitely variable from 1" to 80" IPM Electrics: 460 volt, 3-phase, 60 Hertz Bundle Loader: Capacity: 3-1/2" diameter bars, up to 20' long Weight: Maximum bundle weight of 4,000 lbs. Chip conveyor: Hinge belt type Discharge height: 43" Coolant: Unist spray mist system Automatic unscrambler type storage hopper to feed round bars onto the gravity rack loader of the saw. The unscrambler is limit switch controlled from the loading table of the saw. As bars are used up from the loading table, a low bar supply limit switch is actuated to start the unscrambler. A full supply limit switch stops the unscrambler. Special Features: " Machine base of welded steel construction " Free chip flow design with funneling mounted to hinge belt conveyor " Optimum cutting path through pivot under the clamping area " Saw carriage supported by heavy tapered roller bearings with lifetime lubrication " Precision clamping " Feed cylinder and sawblade are on the same plane to avoid lateral forces " Automatic crop adjustable from 3/8" to 3-1/2" " Minimum remnant end of 2-1/2" " Automatic precision length gauge, hydraulically controlled with cushioning " Micrometer fine tune adjustment for setting within .002" " Electric piece counter with automatic shut-off control