STAMCO SLITTING LINE 72" x 50,000#

72" X 50,000# STAMCO SLITTING LINE

SPECIFICATIONS:
     Coil Weight            50,000#*
     Coil O.D.              30" min. 76" max.
     Coil I.D.              20" to 30" entry
                            20" and 24" exit
     Coil Width             25" min. 75" max.
     Thickness Capacity     16 ga. to .375"
                            10 cuts of .250"
     Line Speed             300 and 800 FPM

COMPLETE WITH:
     -Entry Coil Car and Coil Ramp

     -Double Expanding Mandrel Uncoiler
        19" - 24" Hydraulic Expansion
        Pads for 25" - 30 1/2"
        4 Leaf Mandrel
        Dynamic Braking, 2 - 75 HP DC Drag Generator Brakes
        Sliding Base
        Askanian Edge Control
        Coil Lift

     -Peeler

     -Driven Hold Down Roll

     -5 Roll Flattener
        6 1/2 Diameter Rolls
        20 HP Drive
        Entry Pinch Rolls 10" dia.

     -Crop Shear

     -Edge Guides
        3 Sets Motorized

     -Entry Pinch Rolls
        10" diameter

     -Slitter Head
        2 Heads, 10 1/4" dia. arbor
        Eccentric Vertical Adjustment
        40 HP AC Feed-Up Drive
        D.O. James Right Angle Gear Box 94:1
        Dual Overrunning Clutches
        Timken Bearing
        16 3/4" Max. O.D. Knife Size

     -Dual Rotary Scrap Choppers
        2 - 15 HP DC Motors

     -Edge Control Unit

     -Exit Pinch Rolls

     -Cross Over Table

     -Recoiler
        20" & 24" All Hydraulic Drums
        2 Way Grippers, with main shafts
           (Quick change feature)
        Hydraulic Push-Off
        Sliding base
        250 HP DC Drive
        400/1600 RPM
        230 Volt
        2 Speed Gear Box
        30.6:1 Low Speed
        11.4:1 High Speed
        Herringbone Gears
        Over Arm Separater

     -Exit Coil Car

     -Tooling, Approx. 120 1" Knives, steel spacers,
        rubbers, shims

Complete with all hydraulics and electrics, large
quanity of spare parts, full set of engineering 
drawings.  New Slitter head bearing installed two
years ago.