60" x .105" x 40,000# Rowe/Voss Multi-Blanking Line

YEAR: 1988

MULTI-BLANK LINE

MATERIAL YIELD STRENGTH:        45,000 PSI MILD STEEL
PASSLINE HEIGHT:                48" (1220 mm)
LINE VOLTAGE:                   3 PH/50 HZ.
LINE DIRECTION:                 RIGHT TO LEFT
EQUIPMENT PAINT COLOR:          VISTA GREEN/SAFETY YELLOW
MAX. PART LENGTH:               192" (4887 mm)
MIN. PART LENGTH:               24" (610 mm)
SHEAR SPEED:                    300 SPM
MAX. MATERIAL WIDTH:            60" (1550 mm) (UNTRIMMED)
MIN. MATERIAL WIDTH:            15" (381 mm)
MAX. MATERIAL THICKNESS:        0.120" (3.05 mm) @ FULL WIDTH
MIN. MATERIAL THICKNESS:        0.030" (0.76 mm)
ROLL DIAMETERS:
STRAIGHTENER ROLLS:             4.50"-114 mm (5)
STRAIGHTENER ROLL CENTER
 SPACING:                       6" - 152 mm
EXIT PINCH ROLLS:               4.50"-114 mm (2)
ENTRY COIL BREAKER ROLLS:       4.50"-114 mm (4)
FEED ROLLS:                     3.82"-97 mm (4) (ASSUMED)
SLITTER ARBOR:                  6.50"-165 mm (4 PAIR)
EDGE TRIMMER KNIVES:            9"-228 mm (4)
ROLL POSITION ACCURACY:         +/- 0.002"-0.05 mm
MAX. STACK HEIGHT:              24"-610 mm (ASSUMED)
MAX. STACK WEIGHT:              10,000 LBS. (4536 KG) ASSUMED
MAX. COIL WEIGHT:               40,000 LBS. (18144 KG)
MAX. COIL O.D.:                 60" - 1524 mm
MAX. COIL I.D.:                 23" - 584 mm
MIN. COIL I.D.:                 19" - 483 mm

CONSISTING OF THE FOLLOWING:

-ROWE DUAL COIL CARS:
  SIDE SHIFT TYPE
  40,000# CAPACITY EACH CAR

-UNCOILER:
  MODEL:  40060 DSV
  SERIAL NUMBER:  26408
  OVERARM HOLDDOWN
  AC MOTORIZED & EXPAND

-PEELER TABLE

-ENTRY FLATTENER:
  MODEL:  CET-8-60
  SERIAL NUMBER:  26410
  .135" TO .033" GAUGE
  DOUBLE PINCH ROLL

-EDGE TRIMMER
  W/SCRAP CHOPPER & CONVEYOR

-HERR VOSS PRECISION LEVELLER: 6 HI
  KEYSTONE 66-1.75-19-7 6 HI
  .024" - .105" CAPACITY
  19 WORK ROLLS
  1.75" DIAMETER X 66" FACE ROLLS
  7 FLIGHTS OF MOTORIZED BACKUPS
  150 HP EMERSON DC MOTOR, 1750 RPM
  COMMON DRIVE TO FLATTENER
  NEW ROLLS & BACKUP ROLLS IN 2004

-CASCADE ROLLS

-DOUBLE ROLL FEED
   MODEL:  FDC-506-260
   SERIAL NUMBER:  26416
   60" X .120" CAPACITY

-ROWE MULTI BLANK SLITTER HEAD:
  6.5" DIAMETER ARBORS
  8 KNIVES (MAXIMUM 4 CUTS)
  SERIAL NUMBER:  26417
  SLT-10-60/4

-WYSONG SHEAR
  HIGH SPEED SHEAR
  AIR CLUTCH AND BRAKE
  300 SPM

-RUNOUT BELT CONVEYOR

-STACKER:
  MODEL:  DT 84-16
  60" WIDE X 16' LONG
  SIDE DISCHARGE (REAR DISCHARGE FOR MULTI BLANK)
  DUAL (MULTI BLANK & STANDARD)

-4 POSITION STACKER WHEEL:
  MOVES OUT OF POSITION

-MULTI BLANK STACKER STORED BEHIND MOVES IN OVER RAILS.

-INSTALLED AND UNDER POWER