For info:
We are pleased to quote as follows: ONE - USED OLIVER MODEL HD "ACE" TOOL & CUTTER GRINDER Stock No. 4694 No competitive machine can come close to matching the Oliver ACE for payout on capital invested. Set-up and grinding times are at an absolute minimum to give increased output from your cutting grinding department. The ACE is simple and fool-proff to operate. All readings are made on a direct basis and it is not necessary to make intricate computations. This eliminates the need for skilled cutter and tool grinders with a consequent reduction in labor cost for each reconditioned tool. The construction of all model 300HD cannot be matched by any competitive unit from either a quality or maintenance standpoint. All of the sensitive areas are above the grinding line and away from any grit or abrasive matter. In addition, the ways are all enclosed in a dust tight bellows type enclosure to insure maximum life. The ram reciprocates on balls riding on several hardened ways with only fingertip pressure required for movement. A precision type permanently lubricated grinding wheel spindle is supplied. Radial thrust ball bearings are used in combination with a spring pre-load system to give you one of the best grinding spindles in the industry. The work spindle is hardened and ground and is complete with a special feature-a 24 division index plate for those jobs where fingers are difficult to use. Specifications: Maximum distance between centers: 15" Swing on centers: 8" Cross carriage travel: 14" Angular adjustment of carriage: 180 deg Angular adjustment of spindle head: 180 deg Angular adjustment of table-vert plane: 45 deg Maximum distance wheel to tilting table: 9-1/2" Maximum distance wheel to base table: 26" Maximum horizontal travel of grinding unit: 7" Grinding wheel spindle speeds: 4800, 3800, 3200 RPM Diameter grinding wheel: 4", 5", 6" Vertical adjustment of grinding wheel: 1-1/2" Motor: 1 HP Overall size: 30" x 60" x 68 H Approx weight: 1,500 lbs Equipped with: " Universal fixture " Grinding wheel