For info:
Used Wagner Fully Automatic Hydraulic Cold Saw with Loading Magazine For Non-Ferrous Metals Model WAM-70 (1987) Stock No. 6762 Cutting capacity: Saw is designed for cutting non-ferrous solid and tubing, such as brass, copper and aluminum. w/10" dia. sawblade w/10-3/4" dia. sawblade Solid & heavy wall tubing 2-1/4" 2-3/4" Thin wall tubing w/form jaws 2" 2-1/2" Square solid & tubes 2" 2-1/2" Rectangular solid 2 x 2-3/4" 2-3/4" x 2-1/2" Rectangular tubing 4-3/4" x 1-3/4" 4-3/4" x 2-1/4" Cutting Speeds: 875/1700 rpm Cutting Feed: Infinitely variable from 1" to 40" per minute Saw drive motor: 7.5/15 HP Hydraulic motor 1-1/2 HP Wiring: 460 volt, 3 phase, 60 hz Shipping Weight: 3200 lbs. Dimensions: 28 ft long x 6 ft wide x 7 ft. high (approx.) Special Features: *Machine base of welded steel construction with large coolant reservoir *Free chip flow design with funneling mounted to hinge belt conveyor *Saw carriage supported by heavy tapered roller bearings with lifetime lubrication *Feed cylinder and sawblade are on the same plane to avoid lateral forces *Extremely fast blade retraction (33 ft/min) with end position cushioning *Automatic 14 foot pusher type material infeed powered by a fluid motor *Automatic 14 foot loading table with 30" inclined loading depth *Automatic crop cut adjustable from 3/8 " to 3-1/2"