OKK MCV-1060 VERTICAL MACHINING CENTER, Neomatic 635, 84"x, 42"y, 31"z, 6000RPM, 50 Taper, 40ATC, Hi-Spd Mchn Md., 200MB HDD, 35HP, #BR15579.....(1999)

INSTALLED.............1999  


TABLE DIMENSIONS..................98.43 X 41.73
TABLE T-SLOT......................7 X 0.866"
TRAVELS..(X) AXIS.................84.25"
         (Y) AXIS.................41.73"
         (Z) AXIS.................31.5"
SPINDLE NOSE TO TABLE.............9.84 - 41.34"
MAX. TABLE LOAD...................11,023 LBS.
SPINDLE TAPER.....................#50  7/24
SPINDLE RANGE (AUTO SELECT).......2
SPINDLE SPEED.....................25 - 6,000 RPM
SPINDLE DRIVE.....................35/30 HP
SPINDLE TORQUE (MAX)..............907 FT - LBS.
RAPID TRAVERSE (X/Y)..............472 IPM
               (Z)................394 IPM
FEED RATE RANGE...................394 IPM
AXIS MOTOR (X/Y/Z)................6.0 / 6.6 HP
AXIS THRUST (X/Y)..................7,118 LBS (MAX)
AXIS THRUST (Z)....................7,118 LBS (MAX)

AUTOMATIC TOOL CHANGE
MAGAZINE CAPACITY..................40 TOOLS
TOOL SHANK.........................CAT "V"
TOOL DIAMETER (MAGAZINE FULL)......4.33" (MAX)
TOOL DIA. (ADJ. POTS EMPTY)........7.87" (MAX)
TOOL LENGTH (FROM GAUGE LINE)......13.78" (MAX)
TOOL WEIGHT (MAXIMUM)..............44.1 LBS
TOOL TO TOOL CHANGE TIME...........2.5 SECONDS
CHIP TO CHIP.......................10 SECONDS
MACHINE DIMENSIONS.................16.1x19.3x13.1 FT

EQUIPPED WITH:
OKK NEOMATIC 635 CNC CONTROLS
CHIP AUGER
HIGH SPEED MACHINING MODE 1 FOR CONTOURING
ETHERNET INTERFACE
SOFT SCALE 111 ON X,Y,Z AXIS & SPINDLE
HARD DISK 200MB
MANUAL PULSE HANDWHEEL
ALL CAST CONSTRUCION - DIAGONAL RIBBED COLUMN & BED
AUTOMATIC WAY LUBRICATION ON ALL AXIS' WITH ALARM
COOLANT EQUIPMENT
SYNCHRONOUS TAP CYCLE
HELICAL INTERPOLATION
HIGH SPEED TYPE ATC
INTEGRAL, HARDENED, & GROUND BOX WAYS TYPE
TURCITE COATED
**** RAN ONLY ALUMINUM ***