OKK MCV-860 VERTICAL MACHINE CENTER, OKK Neomatic 635, 80"x, 34"y, 29"z, 6000 RPM, 30/35HP, 30ATC, Synch. Tap, Hi-Speed Machining, 2-Spd Gearbox, 50 Taper, #2547.....(1999)

INSTALLED.............1999
SERIAL NUMBER.........186
MANUFATURED NO........MA67088A  


TABLE DIMENSIONS..................90.55 X 33.46"
TABLE T-SLOT......................5 X 0.866"
TRAVELS..(X) AXIS.................80.31"
         (Y) AXIS.................33.86"
         (Z) AXIS.................28.35"
SPINDLE NOSE TO TABLE.............7.87 - 36.22"
MAX. TABLE LOAD...................6,614 LBS.
SPINDLE TAPER.....................#50  7/24
SPINDLE RANGE (AUTO SELECT).......2
SPINDLE SPEED.....................25 - 6,000 RPM
SPINDLE DRIVE.....................35/30 HP
SPINDLE TORQUE (MAX)..............905FT - LBS.
RAPID TRAVERSE (X/Y)..............630 IPM
               (Z)................472 IPM
FEED RATE RANGE...................394 IPM
AXIS MOTOR (X/Y/Z)................6.0 HP
AXIS THRUST (X/Y)..................7,118 LBS (MAX)
AXIS THRUST (Z)....................7,118 LBS (MAX)

AUTOMATIC TOOL CHANGE
MAGAZINE CAPACITY..................30 TOOLS
TOOL SHANK.........................CAT "V"
TOOL DIAMETER (MAGAZINE FULL)......4.06" (MAX)
TOOL DIA. (ADJ. POTS EMPTY)........7.87" (MAX)
TOOL LENGTH (FROM GAUGE LINE)......13.78" (MAX)
TOOL WEIGHT (MAXIMUM)..............44.1 LBS
TOOL TO TOOL CHANGE TIME...........2.5 SECONDS
CHIP TO CHIP.......................9.0 SECONDS
MACHINE DIMENSIONS.................17.2x15.9x11.8 FT
MACHINE WIEIGHT....................37,500 LBS.

EQUIPPED WITH:
OKK NEOMATIC 635 CNC CONTROLS
MANUAL PULSE HANDWHEEL
(2) SPEED GEAR BOX
ETHER NET
HIGH SPEED MACHINING MODE
SYNCHRONIOUS TAP CYCLE
HELICAL INTERPOLATION
CHIP CONVEYOR
COOLANT TANK (CAPACITY 66.05 GAL) 
**** ONLY RAN ALUMINUM *********