600 Ton Macrodyne Hydraulic Stamping Press

Maximum pressing force .................... 600 tons
Maximum slow stripping force .............. 20 tons
Bed size .................................. 96" LR x 48" FB
Daylight .................................. 28"
Shut height	............................... 16"
Main cylinder ............................. 1 @ 21"
Stroke of main cylinder	................... 12"
Speeds:
The following speeds provide a rate of 25SPM based on the following working stroke and excluding loading/unloading or dwell times.

Fast approach speed - ..................... 3.75 inches @ 800"/min 0.28 seconds
Pressing speed -  ......................... 0.25 inch@90"/min 0.17 seconds
Fast return speed - ....................... 4.0 inches @ 700"/min 0.34 seconds
Acceleration, deceleration, compression,
Decompression, valving time, etc. ......... 1.3 seconds
Total cycle time .......................... 2.09 seconds
Primary pumping package	................... 1 @ 200 HP

The slide and bolster with the frame are designed for a deflection of no more than 0.002"/foot of span, based on the total span, corner to corner, in combined bending and shear, under full tonnage loaded over 2/3 of the bed area.

Equipped With:
Frame style	welded
Pressing direction	down
Slide/platen guiding 8-point
Press capacity 600 tons
Maximum stripping capacity	10 tons

Overall width of press:	170-1/4"
Overall depth of press:	141"
Overall height of press: 307.5"
Height from face of bolster to the floor: 30"
Height from the floor to the top of the press: 238-3/8"
PLC ALLEN BRADLEY MODEL SLC 5/04