For info:
NEW-2004 Control ................................: Fanuc 180isMB Travels: X.......................................: 24" Y.......................................: 24" Z.......................................: 27.9" Max. Workpiece Diameter.................: 27.56" Max. Workpiece Height ..................: 38.12" Pallet Change Time .....................: 5 Seconds Pallet Index............................: 0.001 Degree Spindle Nose to Pallet Center ..........: 5.91"-33.86" Spindle Center to Pallet Top ...........: 1.97"-26.3" Horsepower 2min./30min./cont............: 30/15/10 hp Pallet Work Surface (2).................: 19.69" x 19.69" Max. Workpiece Weight...................: 881 lbs. Spindle Speed...........................: 100 to 12,000 RPM Spindle Speed Ranges....................: 2 Spindle Taper...........................: CAT #40 V Flange Spindle Torque .........................: 103.2 ft. lbs. Rapid Traverse Speed X, Y, Z............: 1574 IPM Tool Magazine Capacity..................: 60 ATC Tool Change Time Tool to Tool...........: 1.0 Sec. Max. Tool Diameter (full magazine)......: 3.23" Max. Tool Dimeter (adjacent pots emty)..: 5.91" Max. Tool Length .......................: 13.87" Max. Tool Weight .......................: 17.6 Lbs. Pallet Change Time......................: 5 Sec. Pallet Change System....................: Direct Turn Style Pallet Change Time......................: 6 Sec. Spindle Motor...........................: AC 30 HP Machine Height..........................: 109" Floor Space ............................: 98.23" x 230.51" Total Machine Weight...................: 18,100 lbs. Table indexing time for 90 degree.......: 0.5 sec. Table Rotary Speed .....................: 40min-1 Equipped With: Helical Interpolation Coolant Thru Spindle w/Filtration System High Pressure Unit 1000 PSI Coolant Ceiling Shower Synchronous Tapping Lift Up Chip Conveyor Direct Turn Type Pallet Changer Adaptive Feed Rate Control Function Macros Standard Skip Function