For info:
Year 2003 Control: Heidenhain Millplus IT 5 Axis X-Axis.............................. 29.52" Y-Axis.............................. 23.62" Z-Axis.............................. 20.5" Main drive (100 / 40% DC)........... 46.9 HP / 33.5 HP Rapid traverse: X-Axis.............................. 1968 IPM Y-Axis............................. 1968 IPM Z-Axis.............................. 1968 IPM Max Feed Rate (X,Y, Z-Axis)......... 787 IPM Fixed table......................... 39.4" x 24.41" Swivel rotary table................. 27.56" x 19.68" Max. Table Load..................... 770 lbs. Swivel Range B-Axis................. 0 /+180 Degrees Swivel Range C-Axis................. 360 Degrees Tool Capacity....................... 60 Tools (2 x 30 Tools) Chip-to-chip-time (approx.)......... 7 seconds Maximum Tool Diameter............... 3.14" / 4.13”-5.12" Maximum Tool Length.................. 12.4" Maximum Tool Weight.................. 13.23 lbs (148.4 lbs / Chain) Spindle Taper........................ Cat 40 Speed Range RPM...................... 18,000 RPM Spindle Torque....................... 60.48 ft/ lbs Machine Weight (approx).............. 17,640 lbs D x W x H (approx)................... 16.7’ x 19’ x 9.8’ Equipped With: MillPlus IT 3D Contouring CNC Control 15" TFT flat screen with high resolution 2GByte Hard Drive NC Rotary Table with NC Swivel Axis High Pressure Coolant 580 PSI / 6.07 gal/min. Thru Spindle Coolant System Renishaw MP-10 Infrared Probe Laser Tool Measuring (Length & Diameter) 3D Tool Compensation Tool Centre Point Management Visiport Spin Window Oil & Coolant Mist Separator with Electrostatic Filter Programmable coolant nozzles Hydraulic Clamping for NC Swivel Rotary Table Electronic Hand wheel Chip Conveyor *** 1200 CUT HOURS ***