48" x .250" x 40,000 lbs. MCKAY Cut to Length

SPECIFICATIONS:

Material:		Mild Steel
Shear Stress:	60,000 Lbs. PSI (Max.)
Strip Gauge:	.090" - .250"
Strip Width:		24" Min. - 48" Max.
Coil Size:			17" to 33" I.D. x 50" O.D.
Length of Cut:	4' to 11'8" Max.
Line Sped:		150 FPM

Consisting of the Following:

Entry Storage Conveyor:

48" x 40,000 Lb. McKay Double End Cone Uncoiler with Coil Car:
	G.E. Gear Motor Drive:		3 HP
	Pit Type:					30" Deep
	Witchita Air Clutch
	Stearns Electric Brake
	Miller Hydraulic Cylinder
	6" Dia. - 12-1/2" Stroke
 48" Wean Flattener:
	(3) Hydraulic Breaker Rolls 
	3 over 2 Flattening Rolls, Individually Adjusted
	G.E. DC Motor, 60 HP, 1750-2400 RPM
	Drive Ratio 21-1/2:1
	Drives 9 Universal Joints

Side Guides:
	G.E. Gear Motor Rail Adjustment

Wean Shear with Pinch Rolls (Needs Bearings)
	Arrangement Dwg. No. S2210 & 2211
	54" L. Upcut 3-1/2" Stroke
	Air Clutch, 5" Dia. Drive Shaft

Carryout Conveyor:

Wean Conveyor and Stockpiling Section:
	Comes out at 90 Degrees to Line 
	2 HP G.E., 1160 RPM
	Horsburgh & Scott Reduction Gear, 113:1, 1 HP
	Logan Air Cylinder, 12" Bore, 4" Stroke
	Anker-Holth Hydraulic 3" Bore, 92" Stroke

Vickers Integral Hydraulic Unit:
	15 HP, G.E. Motor, 1175 RPM
	70 Gallon Tank
	45" x 27" x 15-1/5"
	Max. Pressure:	1000 PSI
	Min. Pressure:	75 PSI

Motor Generator Set:
	Speed Variator
	Direct Current
	75 HP, G.E. Motor, 1770 RPM
	G.E. DC 50 KW, 1800 RPM
	DC Motors Enclosed in Cabinet 7' x 6' x 2-1/2'