For info:
Serial Number: 8465 - 8468 Age: 1956 SPECIFICATIONS: Hand of Line: Right to Left Maximum Strip Width: 36” Maximum Strip Thickness: 7 Cuts .125” Maximum Coil O.D.: 54” Maximum Coil Weight: 13,800# @ 36” Width Coil I.D.: Entry 16” to 24”; Exit - 16” to 20” Line Speed: 150-550 FPM Approx. Pass Line Height (In Slitter): 42” CONSISTING OF THE FOLLOWING COMPONENTS: 20,000 Lb. WEAN McKAY Coil Car, Model #1958, S/N 255PP07 48” Wide; Hydraulic Lift to Uncoiler Unit Designed to Run on Rails, With Hydraulic Motor Drive #20-H-36 Mandrel Type Uncoiler Face - 40”; 3-Segments; Hydraulic Expansion Band Brake - Manually Operated Expansion from 14-1/2” - 19-1/2” With Steel Filler Plates For 24: Max. Coil ID. Model #3, 36” Slitter Arbors - 5” Dia. Guarded Entry & Exit Pinch Rolls (Missing Lower Exit Roll) Entry Side Guide Shoes Double Entry Deflector Rolls 15 HP, AC Thread-Up Motor, Delco, 220/440/60/3-1735 RPM D.O. James Planetary Gear Reducer Size 143; Ratio 64:1 Jaw Clutch, Manually Operated from Front of Machine Model #100 Recoiler With Hydraulic Cylinder Operated Overarm Holddown and Coil Separators Face - 40” 16” Diameter Drum With Aluminum Filler Plates for 20” Diameter Manual Collapse & Gripper Bar; Hydraulic Push-Off Plate 75 HP, G.E. Tri Clad Induction Motor, 230/460/60/3, 1770 RPM, 178/89 Amps Magnetic Brake D.O. James Gear Box (Herringbone Speed Reducer) Size 240-HD, S/N 175589, 1750 RPM, Ratio 46.4:1, Spider Loopco Hydraulic Driven Scrap Level Winder, S/N 1401R8287-A Maximum Bundle Weight: 6,000 Lbs. - Estimate Maximum Strip Capacity, Mild Steel: (2) 1” W Pieces x 3/16” Thick Distance Between Side Plates: 18” Including 6” Extension Diameter of Side Plates: 57” Less Controls Hydraulic Motor Drive for Vari-Speed Rotation of Winding Mandrel Tapered Winding Mandrel for Easy Bundle Removal Cylinder Operated Guided Large Hardened Eye for Level Wind Vickers Hydraulic Pump and Valves 15 HP Motor, 1750 RPM Age: 1978, Estimate Vickers Hydraulic Unit 7-1/2 HP Delco, 220/440/60/3-1170 RPM, Less Push-Buttons Wall Mounted Control Panel & Resistor Bank TOOLING: (45) Knives 10-1/2” O.D. (21) 1” Rubbers (31) Spacers 2" x 3" Wide x 6-1/2 " O.D. (25) 1" Rubbers (128) Spacers 1/4” & 1/2” Wide x 7” O.D. (16) 1/2” Rubbers (46) Rubbers 1” Wide x 10-1/2” O.D. (47) 1/4” Rubbers (10) 1/2” Spacers (27) 1/2” Rubbers (20) 1” Spacers (774) Pieces of Paper (37) 1/16” Spacers Plastic Shims (174) Assorted Pieces of Metal and Plastic Spacers TOTAL WEIGHT: 33,000# - Approx. CONDITION: Good, Inspection Suggested