2-1/2" x .134" ABBEY ETNA #2KU,150 KW HF, 200 FPM, Complete w/ Tooling, 1962 (same as #682)

SPECIFICATIONS:

Maximum Tube Diameter:		2-1/2" (63.5 mm)
Minimum Tube Diameter:		.500" (12.7 mm)
Maximum Wall Thickness:		.134" (3.4 mm)
Minimum Wall Thickness:		.032" (0.8 mm)
Maximum D/T Ratio:			60:1
Minimum D/T Ratio:			10:1
Maximum Material Yield:		50,000 PSI
Maximum Mill Speed:			200 FPM (60 M)
Roll Space Forming:				8" (203 mm)
Roll Space Fin & Sizing:			5" (127 mm)
Driven Spindle Diameter:		2-1/8" (53.9 mm)
Hand of Operation:				Left to Right
Date of Manufacture:			Abbey Mill - 1962

ENTRY EQUIPMENT:
	
1 - Littell Double 4,000 Lb. Uncoiler, Pnuematic Brake
1 - National Electric Shear Welder
1 - Looping System, Overhead Type, Loopco with 600' Storage

FORMING MILL:

1 - Entry Guide Unit, 4-Roll
3 - Driven Breakdown Stands
4 - Idle Side Roll Units (Cluster unit, 4 pass)
3 - Driven Fin Stands


1 - Idle Side Roll Unit
1 - 30 HP DC Motor and Drive System
1 - Operators Control Station

WELDING STATION:

1 - Seam Guide Lead Roll
3 - Roll Weld Pressure Unit
1 - Dual Scarfing Unit
1 - Bead Winder
1 - 150 KW Electroheating High Frequency Welder with Elva S.C.R.
	Model EWT150-11

COOLANT SECTION:	1 - 6' Coolant Zone, Spray Type System

SIZING MILL:	

6 - Driven Sizing Stands
3 - Idle Side Roll Units
1 - Straightener Unit (Modified Turkshead)
6 - 7.5 HP DC Motors with Drive System

CUT-OFF:	1 - Alpha SR-10 Flying Cut-Off, Model #SR-10-2-55
				2-1/2" Maximum Tube x .125" Wall

TOOLING:	Tooling to produce the size:  1.250", 1.500", 1.750", 2.00", 2.500"

DRAWINGS:

1 - Complete set of Electrical and Mechanical drawings.  All necessary
	Installation drawings.
1 - All necessary catalogs for all equipment purchased with this line.

CONDITION:	 Good