For info:
SPECIFICATIONS: Max. Tube Dia.: 3.0" (76.2 mm) Max. Mill Speed: 200 FPM (61 M) Min. Tube Dia.: .500" (12.7 mm) Roll Space Form: 11.000" (280 mm) Max.Wall Thickness:.148" (3.7 mm) Roll Space Fin & Sizing: 4.500" (114 mm) Min.Wall Thickness:.032" (0.8 mm) Driven Spindle Dia.: 2.5" (63.5 mm) Max. D/T Ratio: 60:1 Hand of Operation: Left to Right Min. D/T Ratio: 10:1 Date of Mfg.: 1959, Reworked Max. Material Yield: 50,000 PSI by A/E 1976 ENTRY EQUIPMENT: 1 - Double 6,000 Lb. Uncoiler, manual expansion and rotation 1 - Guild, Shear End Welder, complete self contained FORMING MILL: 1 - Entry Guide Unit 3 - Driven Breakdown Stands, with transmissions 4 - Idle Side Roll Units (Cluster unit, 4 pass) 2 - Driven Fin Stands, with transmissions 1 - Idle Side Roll Unit 1 - NEW, 30 HP DC Motor and Solid State Controls 1 - Operators Control Station WELDING SECTION: 1 - Side Closer Seam Guide Unit 4 - Roll Weld Pressure Unit 1 - Scarfing and Seam ironer Unit 1 - Bead Winder 1 - Electroheating 150 KW, High Frequency Induction Welder, SCR Package 1991 COOLANT SECTION: 1 - 15' (4.5 m) Coolant Zone, Spray Type System SIZING MILL: 3 - Driven Sizing Stands, with transmissions 3 - Idle Side Roll Units 1 - Straightener Unit (Modified Turkshead) 1 - (New), 30 HP DC Motor and Solid State Controls. TUBE CUT-OFF SYSTEM: 1 - Alpha Model 50-300-134 High Speed Cut-Off Press, with electrical cabinet. 1 - Alpha, Air Over Oil Die Accelerator System 1 - Single dump, pneumatic accuated Run-Out-Table, Max. Length, 16' (4.8 m) MILL PASS ARRANGEMENT: 1 - Driven Breakdown 11 - Side Closer, Seam Guide 2 - Driven Breakdown 12 - 4-Roll Weld Pressure 3 - Driven Breakdown 13 - Scarfing/Seam Ironer 4 - Idle Side Roll 14 - Idle Side Roll 5 - Idle Side Roll 15 - Driven Sizing 6 - Idle Side Roll 16 - Idle Side Roll 7 - Idle Side Roll 17 - Driven Sizing 8 - Driven Fin 18 - Idle Side Roll 9 - Idle Side Roll 19 - Driven Sizing 10 - Driven Fin 20 - Idle Straightener (Modified Turkshead) TOOLING: Tooling to produce the following sizes: 2" - 2-1/2" - 3-1/4" Round DRAWINGS: 1 - Complete set of Electrical and Mechanical drawings. All necessary installation drawings. 1 - All necessary catalogs for all equipment purchased with this line CONDITION: Very Good