For info:
SPECIFICATIONS: Maximum Tube Diameter: 3.0" (76.2 mm) Minimum Tube Diameter: .500" (12.7 mm) Maximum Wall Thickness: .148" (3.7 mm) Minimum Wall Thickness: .032" (0.8 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 250 FPM (76 m) Roll Space Forming: 10" (254 mm) Roll Space Fin & Sizing: 5" (127 mm) Driven Spindle Diameter: 2.5" (63.5 mm) Hand of Operation: Left to Right Date of Manufacture: Abbey Mill - 1966 Thermatool Welder - 1988 Alpha Cut-Off - 1991 D.C. Drive, Allen Bradley 1991 ENTRY EQUIPMENT: 1 - Cooper Weymouth Double 8,000 Lb. Uncoiler, Pnuematic Brake, 13" - 17" Expansion 1 - Guild, Shear End Welder, Complete Self Contained, Model R-907 1 - Overhead Looping System, Dual Strand, 300 Ft. of Strip Storage FORMING MILL: 1 - Entry Guide Unit 3 - Driven Breakdown Stands, with transmissions 4 - Idle Side Roll Units (Cluster unit, 4 pass) 2 - Driven Fin Stands, with transmissions 1 - Idle Side Roll Unit 1 - 30 HP DC Motor and Allen Bradley Digital Drive System 1 - Operators Control Station WELDING SECTION: 1 - Seam Guide Lead Roll 3 - Roll Weld Pressure Unit 1 - Single Scarfing Unit 1 - Bead Winder 1 - Thermatool Model VT150, 150 KW, High Frequency Induction Welder, New 1988 COOLANT SECTION: 1 - 15' (4.5 m) Coolant Zone, Spray Type System SIZING MILL: 3 - Driven Sizing Stands, with transmissions 3 - Idle Side Roll Units 1 - Straightener Unit (Modified Turkshead) 1 - 30 HP DC Motor and Allen Bradley Digital Drive System, PLC Control ALPHA DOUBLE CUT, FLYING CUT-OFF: 1 - Alpha Model CSR3004-49 High Speed Double Cut, Cut-Off Press w/Hydraulic Clutch, Serial Number 190, 3" Max. Dia. x .138" @ 400 FPM 1 - Unico, Hydraulic Digital Length Control System, New 1990 1 - Run Out Table, with Tri-Mation Tube Conveyor System MILL PASS ARRANGEMENT: 1 - Driven Breakdown 11 - Side Closer, Seam Guide 2 - Driven Breakdown 12 - 3-Roll Weld Pressure 3 - Driven Breakdown 13 - Scarfing/Seam Ironer 4 - Idle Side Roll 14 - Idle Side Roll 5 - Idle Side Roll 15 - Driven Sizing 6 - Idle Side Roll 16 - Idle Side Roll 7 - Idle Side Roll 17 - Driven Sizing 8 - Driven Fin 18 - Idle Side Roll 9 - Idle Side Roll 19 - Driven Sizing 10 - Driven Fin 20 - Idle Straightener TOOLING: Tooling to produce the size: 1.125" (28.58) , 1.475" (37.4), 1.51" (25.4), 1.657" (42.0), 1.702" (43.2), 1.75" (44.4), 2.0" (50.8), 2.252" (57.2), 2.542" (64 .5), 2.274" (57.7) DRAWINGS: 1 - Complete set of Electrical and Mechanical drawings. All necessary Installation drawings. 1 - All necessary catalogs for all equipment purchased with this line. CONDITION: Very Good