For info:
SPECIFICATIONS: Maximum Tube Diameter: 3.0" (76.2 mm) Minimum Tube Diameter: .500" (12.7 mm) Maximum Wall Thickness: .125" (3.1 mm) Minimum Wall Thickness: .018" (.46 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 300 FPM (91 M) Roll Space Forming: 10" (254 mm) Roll Space Fin & Sizing: 5" (127 mm) Driven Spindle Diameter: 2.00" (50.8 mm) Hand of Operation: Right to Left Date of Manufacture: Abbey Mill - 1973 Induction Welder - 1973 ENTRY EQUIPMENT: 1 - Littell 4000 Lb. Dbl. Uncoiler, 60" O.D. X 16" - 20" I.D. Model 40-12 1 - Shear End Welder, Complete Self Contained 1 - Overhead Looping System, Four Strand, 800 Ft. of Strip Storage FORMING MILL: 1 - Entry Guide Unit 3 - Driven Breakdown Stands, with Transmissions 4 - Idle Side Roll Units (Cluster unit, 4 pass) 2 - Driven Fin Stands, with Transmissions 1 - Idle Side Roll Unit 1 - 30 HP DC Motor with Shift Box, and Reliance Electrical contols 1 - Operators Control Station WELDING SECTION: 1 - Seam Guide Lead Roll 1 - (4) Roll Weld Pressure Unit 1 - Single Scarfing Unit 1 - Bead Winder 1 - Inductron, 100 KW, High Frequency Induction Welder COOLANT SECTION: 1 - 20' (6 M) Coolant Zone, Spray Type System SIZING MILL: 3 - Driven Sizing Stands, with Transmissions 3 - Idle Side Roll Units 1 - Straightener Units (Modified Turkshead) 2- Idle Squaring Fixtures 1 - 30 HP, DC Motor with Shift Box, and Reliance Electrical Controls FLYING CUT-OFF: 1 - Abbey Etna, 2-Post Hydra-Shear 1 - Digital, Hydraulic Length Control System TOOLING: 15 Sets to Include: .750, .781, .938, .940, .922, 1.050, 1.312, 1.375, 1.625, 1.750, 1.900, 1.938, 2.188, 2.500, 2.500 Rounds DRAWINGS: 1 - Complete Set of Electrical and Mechanical Drawings. All Necessary Installation Drawings. All Necessary Catalogs for all Equipment Purchased with this Line. CONDITION: Very Good, Under Power Reference 9998