1-1/2" x .083" ABBEY ETNA #1KU, 150 KVA ERW, 200 FPM, Complete w/Tooling, 1971

SPECIFICATIONS:

Maximum Tube Diameter:		1-1/2" (38.1 mm)
Minimum Tube Diameter:		.375" (9.53 mm)
Maximum Wall Thickness:		.083" (2.1 mm)					
Minimum Wall Thickness:		.018" (.46 mm)					 
Maximum D/T Ratio:			60:1								
Minimum D/T Ratio:			10:1
Maximum Material Yield:		50,000 PSI
Maximum Mill Speed:			200 FPM (60 M)
Roll Space Forming:				5" (127 mm)
Roll Space Fin & Sizing:			3" (76.2 mm)
Driven Spindle Diameter:		1.5 " (38.1 mm)
Hand of Operation:				Right to Left
Date of Manufacture:			Abbey Mill - 1971 Estimate

ENTRY EQUIPMENT:
	
1 - Littell Double 2,500 Lb. Uncoiler, Pnuematic Brake
1 - Shear End Welder
1 - Looping System, Overhead Type, 400 Ft. of Strip Storage

FORMING MILL:

1 - Entry Guide Unit
3 - Driven Breakdown Stands
4 - Idle Side Roll Units (Cluster unit, 4 pass)
2 - Driven Fin Stands


1 - Idle Side Roll Unit
1 - 10 HP DC Motor and Drive System
1 - Operators Control Station

WELDING STATION:

1 - Seam Guide Lead Roll
2 - Roll Weld Pressure Unit
1 - Dual Scarfing Unit
1 - Bead Winder
1 - Abbey Etna, 150 KVA, Resistance Welder, (Solid State Welder Controls)

COOLANT SECTION:	1 - 6' Coolant Zone, Spray Type System

SIZING MILL:	

3 - Driven Sizing Stands
3 - Idle Side Roll Units
1 - Straightener Unit 
1 - 10 HP DC Motors with Drive System

FLYING CUT-OFF:	1 - Alpha, Model 15-310, S/N 10

TOOLING:  1 - set of complete rolls for .860" Round

DRAWINGS:

1 - Complete set of Electrical and Mechanical drawings.  All necessary
	Installation drawings.
1 - All necessary catalogs for all equipment purchased with this line.

CONDITION:	Very Good