8' x 14 Ga. PACIFIC Hydraulic Press Brake

Serial Number:			4085
Model Number:			40-8
Age:					1971

SPECIFICATIONS:

Bending Capacities:				8' x 14 Ga. Mild Steel
								6' x 12 Ga. Mild Steel
								4' x 10 Ga. Mild Steel
Tonnage Capacity:				40 Tons
Overall Length of Bed & Ram:	8'
Distance Between Housing:		6'  3-1/2"
Stroke:							6"
Daylight:						13"
Throat Depth:					6"
Width of Bed:					2-1/4"
Speeds Approx.:					120"/Min. Closing
								15" - 60"/Min. Pressing at 40 Tons
								135"/Min. Return
Hydraulic Power Unit:			Vickers Model V210-8W-1A-12-S214 Hyd.
								Pump, 8 GPM @ 2,000 PSI
								Driven by 8.75 HP 1800 RPM
								220/440/3/60 Motor

EQUIPPED WITH:				Bed Machined for Angles - Front & Rear
								(2) 52" Long Angle Brackets
								1" High x 2" Wide x 96" Long Die Rail
								Manual Speed & Pressure Control Valve
								Micro-Adjustable Stroke Control
								Ram Levelling & Tilt Control
								2.5" High x 2" Wide x 96" Long Die Rail Spacer
								Push Button Motor Start-Stop
								110 Volt Control Circuit On-Off
								Toggle Switch Inch/Cycle
								(2) Electrical Foot Switches
								Selector Switch Right Hand-Both Foot Switches
								Sectional Puch Clamps on Ram

WEIGHT:						6,000 Lbs.
OVERALL DIMENSIONS:		96" L-R x 36" F-B x 86" H