For info:
SPECIFICATIONS: Maximum Tube Diameter: 2.50" (63.5 mm) Minimum Tube Diameter: .500" (12.7 mm) Maximum Wall Thickness: .095" (2.4 mm) Minimum Wall Thickness: .018" (.46 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 300 FPM (91 M) Roll Space Forming: 8" (203 mm) Roll Space Fin & Sizing: 5" (127 mm) Driven Spindle Diameter: 1.750" (44.4 mm) Worm Gear Ratio: 6:1 (Model 2KU Boxes) Hand of Operation: Right to Left Date of Manufacture: 1977 S/O 11761 ENTRY EQUIPMENT: 2 - Single Littell 4000 Lb. Uncoilers, 60" O.D. X 16"-20" I.D. 1 - Shear End Welder, Complete Self Contained FORMING MILL: 1 - Entry Guide Unit 3 - Driven Breakdown Stands, with Transmissions 4 - Idle Side Roll Units (Cluster Unit, 4 Pass) 2 - Driven Fin Stands, with Transmissions 1 - Idle Side Roll Unit 1 - 50 HP DC Motor with Shift Box, and Westinghouse Electrical Controls 1 - Operators Control Station WELDING SECTION: 1 - Seam Guide Lead Roll 1 - Weld Pressure Unit 1 - Single Scarfing Unit 1 - Bead Winder 1 - Thermatool, Model VT100, 100 KW, High Frequency Induction Welder COOLANT SECTION: 1 - 20' (6 M) Coolant Zone, Spray Type System SIZING MILL: 3 - Driven Sizing Stands, with Transmissions 3 - Idle Side Roll Units 1 - Straightener Units (Modified Turkshead) 2- Idle Squaring Fixtures 1 - 50 HP, DC Motor with Shift Box, and Westinghouse Electrical Controls FLYING CUT-OFF: 1 - Alpha, Model SR-10-2-55, S/N 58 1 - Hydraulic Length Control System TOOLING: 3/4" - 1" - 1-1/4" - 1-3/4" - 2" - 2-1/2" Note: This Machine was used to Manufacture Brass Tubing. DRAWINGS: 1 - Complete Set of Electrical and Mechanical Drawings. All Necessary Installation Drawings. All Necessary Catalogs for all Equipment Purchased with this Line. CONDITION: Very Good, Under Power