For info:
SPECIFICATIONS: Slabbing Mill and Rougher: Horizontal Stand: Sack 4-High Reversing Max. Force: 5,600 Tons, Used 3,500 Tons Backup Rolls: 1,550mm dia. x 1,700mm Work Rolls: 915mm dia. x 1,700mm DC- Supply via 2 x Motor Generator Sets Twin Drive DC2 x 4,040 kW Continuous Speed: 0 - 2.35 - 4.7m at 900mm Roll dia.. Screw Down 2 x 110 KW DC Continuous Speed: 0 - 12 - 25m/sec Max. Rollgap: 650mm Max. Width: 1500mm Vertical Stand: Siemag Rolldiameter: 900mm Width: 600 - 1500mm Motor: 1470KW DC cont. Descaler High Pressure Water 125 Bar 1,000 l/min. both sides of rougher Rotary Cropshear: Motor ASEA MA 97.280KW at 730 rpm Automatic Cutting Max. Thickness (stainless steel) 20mm by Strip Width 1320mm and Strip Speed 1.7m/sec. Coiling Furnaces: Mandrel Diameter: 1220mm Mandrel Width: 1675mm Slit Length: 1475mm Material of Mandrel: 20% Cr 40% Ni Motor Siemens: 735 KW at 0 110 180 rpm Pinch Roll: Davy United Roll Dia. 430 -455mm Max Force 15.2 Ton at Airpressure Bar. Motor 147KW. Steckel Mill: Davy United 4-High Reversing Backup Rolls: 1345mm dia x 1524mm Work Rolls: 686mm dia x 1524mm Max. Force 4,000 Tons Used 3,200 Tons Thyristor DC-Supply Motors 2 x 2,50KW DC cont. in Tandem Speed 0 - 4.15 - 10.4m/sec. at 660mm Roll Dia. Max. Torque 195 Ton m Automatic Gauge Control by ASEA AGC Speed 2,5mm/s at 3,000 Tons Strip Width 600 - 1,320mm Strip Thickness 2.0 - 8.0mm Coiler Type Upcoiler: Davy United Coilsize: ID 762mm OD 1,500 mm max. Coil Weight: 8,5kg/mm Strip Width Max. Motor: 300KW (0 520 1250 rpm) Normal Coiling Speed: 4m/sec. Originally designed for 11m/sec. today max. 7m/sec. Roller Tables Width: Slabbing Section: 1950mm Finishing Section: 1525mm Main Distances: Pusher Furnace to Horizontal Rougher: 37,100mm Rougher Vertical-Horizontal: 5,400mm Rougher Horizontal-Crop Shear: 74,900mm Rougher Horizontal-Steckel Mill: 90,300mm Steckel Mill-Coiler: 65,300mm Electrical Equipment: 2 nos 3-Phase Combined Self- and Fancooled Outdoor Transformers ASEA TET/8009 20 MVA. 132+/- 4 x 2,5%/6,3KV in Back Lash 50 cy Connected Yo/Yo. Back Lash Losses: 46KW Copper Losses: 116KW Impedance Voltage: 10,7% (8% at 15 MVA) Idle Running Current: 1,6% Weights (all approximate): Mechanical Parts of Reheating Furnace 370 tons incl. Control Burners, Pusher etc. Steam-boiler, Slab-extractor Roller Tables (start to rougher) 300 tons Edging Mill and Auxiliaries 150 tons Roughing Mill 1,800 tons Roller Tables, Guides, (Rougher to Steckel Mill) 250 tons Flying Shear 100 tons Steckel Mill 700 tons 2 Coiling Furnaces System 200 tons 2 nos Pinch Roller Systems 50 tons Roller Tables to Up Coiler 250 tons Laminar Cooling System 50 tons Up Coiler incl. Coil Conveyor and Coil Weighing 400 tons Lubrication and Greasing Systems 150 tons General Parts Tanks, Piping, Armatures, Platforms 500 tons Stair Cases and Control Cabinets Electrical Equipment, Controls, Transformers 1,000 tons Generator, Motors etc. Roll-grinder 75 tons 1 nos Slab-grinder 85 tons 6 nos Overhead Cranes 250 tons _________ Approx. 6,680 TONS Spare Parts Approx. 500 tons Note: Pictures and video are available but inspection is suggested.