For info:
Serial Number: 73295 SPECIFICATIONS: Diameter Range: .125" to 3.750" Length Range: Up to 16" Depending on Bore Diameter Spindle Speeds: High Range: 800, 1000, 1270, 1600, 2000, 2500 Low Range: 200, 250, 320, 400, 500, 640 Maximum Diameter of Work Piece, Through Holding Fixture: 4" Note: Other Arrangements Could Hold Larger Parts Stroking Speeds: 80, 110, 160, 220, 310 Per Minute Note: The Work Piece is the Moving (Stroking) Part Setup Time: Approximately 10 to 20 Minutes Current Mandrel Installed: #2H-P28-2000W (Honing Length 9") Note: Assembled with One Stone and One Shoe Capable of 1.855" to 2.625" Diameter Bore Having a Stone Size of 3-1/4" L x 1/4" W Note: Machine is Capable of Auto Shut Off, But Fixture is Missing Honing Oil Capacity: 25 Gallons EQUIPPED WITH: Self Contained Filter System: Filter Element #PF-105-4 Operators Controls: Stroke Manual/Power, Hone Start/Stop MOTOR DATA: Spindle Motor: 1 HP, 230/460/3/60 Stroking Motor: 1/2 HP, 230/460/3/60 Honing Oil Pump Motor: 1/2 HP, 230/460/3/60 Note: Machine is Setup to Run on 460 Volts, 3 Phase, 60 Hz Overall Dimensions: 49" W x 72" L x 67" H Weight: 1,150 Lbs., Approximate Condition: Will Clean, Paint & Operate Under Power at Our Shop