For info:
SPECIFICATIONS: Maximum Tube Diameter: 2-1/2" (63.5 mm) Minimum Tube Diameter: .500" (12.7 mm) Maximum Wall Thickness: .134" (3.4 mm) Minimum Wall Thickness: .032" (0.8 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 200 FPM (60 M) Roll Space Forming: 8" (203 mm) Roll Space Fin & Sizing: 5" (127 mm) Driven Spindle Diameter: 2-1/8" (53.9 mm) Hand of Operation: Left to Right Date of Manufacture: Abbey Mill - 1962 ENTRY EQUIPMENT: 1 - Littell Double 4,000 Lb. Uncoiler, Pnuematic Brake 1 - National Electric Shear Welder 1 - Looping System, Floor Type 300 Ft. of Strip Storage FORMING MILL: 1 - Entry Guide Unit, 4-Roll 3 - Driven Breakdown Stands 4 - Idle Side Roll Units (Cluster unit, 4 pass) 3 - Driven Fin Stands 1 - Idle Side Roll Unit 1 - 30 HP DC Motor and Drive System 1 - Operators Control Station WELDING STATION: 1 - Seam Guide Lead Roll 3 - Roll Weld Pressure Unit 1 - Dual Scarfing Unit 1 - Bead Winder 1 - Thermatool Model VT140, 140 KW, High Frequency Induction Welder COOLANT SECTION: 1 - 6' Coolant Zone, Spray Type System SIZING MILL: 6 - Driven Sizing Stands 3 - Idle Side Roll Units 1 - Straightener Unit (Modified Turkshead) 6 - 7.5 HP DC Motors with Drive System CUT-OFF: 1 - 3" YODER P-55 Cut-Off Press, Serial Number - Y4271-65 Capacity: 55 Ton Tube Capacity: 3" O.D. x .134" Wall Cutting Capacity: 1.250 Sq. In. Stroke: 6" Max. Strokes per Minute: 75 Max. Stock Speed: 300 FPM Max. Section Width: 5" Throat: 5-1/4" Upper Die Slide: 5-3/4" Width, 28-1/2" Length Lower Die Slide: 7-3/4" Width, 33" Length Equipped With: Air Clutch Air Brake Height & Cross Adjustment of Base New Electrical Controls Main Motor Data: 7.5 HP, 208/220/440/60/3-1760 RPM TOOLING: Tooling to produce the size: 1.250", 1.500", 1.750", 2.00", 2.500" DRAWINGS: 1 - Complete set of Electrical and Mechanical drawings. All necessary Installation drawings. 1 - All necessary catalogs for all equipment purchased with this line. CONDITION: Very Good