For info:
SPECIFICATIONS: Capacity: 60" x 1/4" Mild Steel Coil Weight: 44,000 Lb. I.D. Range: Entry: 20" & 24" Exit: 20" w/Risers for 24" Speed, Constant: 200/600 FPM Speed, Coil Build-Up: 1,000 FPM Maximum Mode of Operation: Pull Through Drive Slit, Tight Line Drive Slit, Loop Cut Chart: 5 Cuts .250" Mild Steel 8 Cuts .135" Mild Steel 17 Cuts .060" Mild Steel 31 Cuts .019" Mild Steel EQUIPPED WITH: Entry Coil Car - Floor Type 50,000 Lb. x 72" O.D. Self Contained Hydraulics 22" Lift Pendant Operator Controls Snubber Roll Machine Mounted To Uncoiler Reversing Hydraulic Drive Recirculating Water Unit Radiator Type Heat Exchanger Automatic Edge Control Photo-Electric Type Floor Mounted C-Frame Powered Traverse For Width Adjustment Peeler Extending Blade Type Hydraulic Actuation Entry Pinch Roll/Side Guide Unit Floor Mounted Unit Pinch Rolls: 7" Diameter Top Roll, Urethane Covered 6" Diameter Bottom Roll, Steel Side Guides: Roll Type Individual Powered Adjustment Entry Crop Shear Hydraulic Type Capacity 1/4" Mild Steel x 62" Wide With Drop Table Slitter - Single Eccentric Type Removable Head 7-1/2" Diameter Arbors Powered Adjust Top Arbor 75 HP DC Drive Motor Scrap Winders (2) 34" Diameter x 15" Wide Bundle 1,500 Lb. Capacity @ 50% Density 1/4" Mild Steel x 1" Wide Strand Each Winder Level Wind Strip Loop Support Curved Steel Guide Provision For Replaceable Carpet Cover Drop Type Threading Table To Slitter Pit Threading Table Machine Mounted To Tension Stand Hydraulic Actuated Raises For Theading Pivots Down Into Pit For Running Tension Stand Drag Style Variable Pneumatic Pressure On Pads Entry Separator Shaft With Tooling Recoiler Threading Table Mounts To Tension Stand Hydraulic Actuation Recoiler Capacity: 60" x 44,000 Lb. 20" Diameter Mandrel w/Risers For 24" Hydraulic Expansion & Gripper Hydraulic Push Off 125 HP DC Motor 2-Speed Gear Changer Exit Coil Car - Floor Type 50,000 Lb. x 72" O.D. Self-Contained Hydraulics 22" Lift Pendant Operator Controls Narrow Coil Retaining Arms Overarm Separator Machine Mounted To Recoiler Pneumatic Actuation Swing-Away Outboard Bearing Includes Separator Discs And Spacers Hydraulic Unit 20 GPM 1500 PSI 100 Gallon Tank Electrics Main Console Aux. Operator's Stations AC Control Panel Solid State DC Controls Slitter Tooling Knives Steel Spacers