3" x .125" ABBEY ETNA #2KU, 150 KW H.F., 300 FPM, 1978 Mill Number 8 at WTC - NOT ADVERTISED/STB

SPECIFICATIONS:

Maximum Tube Diameter:		3.0" (76.2 mm)
Minimum Tube Diameter:		.500" (12.7 mm)
Maximum Wall Thickness:		.125" (3.1 mm)
Minimum Wall Thickness:		.018" (.46 mm)
Maximum D/T Ratio:			60:1
Minimum D/T Ratio:			10:1
Maximum Material Yield:		50,000 PSI
Maximum Mill Speed:			300 FPM (91 M)
Roll Space Forming:				10" (254 mm)
Roll Space Fin & Sizing:			5" (127 mm)
Roll Root Diameter:				4.75" (120.6mm)
Driven Spindle Diameter:		2.00" (50.8 mm)
Hand of Operation:				Left to Right
Date of Manufacture:			Tube Mill - 1978
								Induction  Welder - 1988
								
Mill Speeds @ 1800 RPM, with Drive All Shift Boxes:
 RATIO				MILL SPEED
2.778:1				103 FPM (31M)
1.883:1				152 FPM (46M)
1.267:1				220 FPM (67M)
  .943:1				296 FPM (90M)

Spur Gear Ratios in Breakdown Stands: (#1) 1.4:1, (#2)  2.0:1, (#3)  2.5:1

ENTRY EQUIPMENT:

1 - Littell 4,000 Lb. Uncoiler, 60" O.D. X 16"-20" I.D. Model 40-12
1 - GUILD Shear End Welder, Complete Self-Contained, S/N: WT-12773
1 - LOOPCO CANADA Strip Accumulator System
	Serial Number: 1535LC8747A
	5 Head Feed Section Accumulator
	Approximately 200' Long, Overhead Strip Accumulator, 
	Approx. 1,000' Strip Storage

FORMING MILL:

1 - ABBEY ETNA #2K3.0 Forming Mill
	Serial Number: 396 (1978)
	3 Breakdown Stands
	2 Fin Stands
	5 Vertical Stands, Entry Roller Station
	1 - 8 Roller Horizontal Station
	75 HP DC Drive System
	
WELDING SECTION:

1 - INDUCTRON High Frequency Welder, 150 KW
	1 - 4 Roll Weld Pressure
	1 - Lead Roll Seam Guide
	1 - Dual Scarfing Unit

COOLANT SECTION:	

1 - ABBEY ETNA 20' Coolant Zone

SIZING MILL:

1 - ABBEY ETNA Sizing Mill
	Model #2K3.0 (1978)
	3 - Sizing Stands
	3 - Idle Side Rolls
	1 - Squaring Head
	2 - Turksheads
	75 HP DC Drive Motor

FLYING CUT-OFF:	

1 - ALPHA INDUSTRIES Hydraulic Flying Cut-Off Shear
	Model #SR 12-30-45/78-501
	Serial Number: 75
	3.00" O.D.
	300 FPM
	1 - Digital Length Control System
ALPHA INDUSTRIES Runout Table
	30' Long (approximate) w/Stop Guides

TOOLING:		To Produce the Following:
	.500" - .625" - .706" - .750" - .781" - .840" - .875" - .940" - 1.00" - 1.00" - 1.094" -
	1.125" - 1.181" - 1.250" - 1.313" - 1.375" - 1.437" - 1.500" - 1.563" - 1.625" - 
	1.660 - 1.681" - 1.750" - 1.875" - 2.00" - 2.250" - 2.750"

DC DRIVE SYSTEM
	1 - GENERAL ELECTRIC Model CD193PA09A173
		Solid State Mill Controller
		S/N: RJ-1-317UJ

CONDITION:	Excellent, Under Power