2-1/2" x .134" ABBEY ETNA #2KU, ReducingType, 150 KW HF, 275 FPM, 1962

Age:			1962
Serial Number:	240

MILL SPECIFICATIONS:

Maximum Tube Diameter:		2 1/2"
Minimum Tube Diameter:		1/2"
Maximum Wall Thickness:		.134"
Maximum DT Ratio:				60 to 1
Minimum DT Ratio:				10 to 1
Maximum Material Yield:		55,000 PSI
Maximum Mill Speed:			275 FPM
Roll Space Forming:				10"
Roll Space Fin & Size:			4-1/8"
Spindle Diameter:				2-1/2"
Hand Of Operation:				Left to Right

ENTRY EQUIPMENT:

1 - 4,000 Lb. LITTELL Double Uncoiler
1- GUILD Shear End Welder (UK Built)

FORMING MILL:

1 - Entry Guide Unit
3 - Driven Break Down Stands
4 - Idle Side Roll Units (Cluster Unit)
3 - Driven Fin Passes
1 - Idle Side Roll (Between Fins)

WELDING SECTION:

1 - (2) Roll Weld Pressure
1 - Double Lead Roll Seam Guide Unit
1 - THERMATOOL #UT 60 H.F. Welder
1 - Dual Scarfing Stand
1 - Chip Winder w/Motor
1 - 8' Coolant Zone

SIZING MILL:

5 - Driven Sizing Stands
4 - Idle Stand Roll Units

CUT-OFF PRESS:

1 - YODER Rotary Type

MOTORS:
	
1 - Forming Motor 75 HP DC
5 - Sizing Motors, 7-1/2 HP DC
1 - DC Solid State Controller (NEW)

TOOLING: 
Note: May Be Incomplete, Inspection Required

1.250" (31.7 mm), 1.500" (38.1 mm), 1.750" (44.4 mm), 2.00" (50.8 mm),
2.50" (63.5 mm)

Condition:		Good