1" x .043" LIVERNOIS Tube Mill

Age:		1985

SPECIFICATIONS:

Maximum Tube Diameter:		1" (25.4 MM) 
Minimum Tube Diameter:		 1/2" (12.7 MM)
Maximum Wall Thickness:		 .043" (1.09 MM)
Minimum Wall Thickness:		 .009" (.23 MM)
Maximum Mill Speed:			442 FPM (135 MPM)
Roll Space Forming:				3" (76.2 MM)
Roll Space Fin & Sizing:			3" (76.2 MM)
Driven Spindle Diameter:		1-1/2" (38.1 MM)
Hand of Operation:				Left to Right

ENTRY EQUIPMENT:
	
2 - Single Uncoilers 1,500 Lb. Uncoiler, Pnuematic Brake
1 - Shear End Welder, Guild DMA 100-3
1 - Kent Corp. Floop

FORMING MILL:

1 - Entry Guide Unit
4 - Driven Breakdown Stands
1 - Driven Fin Stand
1 - Operator Control Station

WELDING STATION:

1 - Seam Guide Lead Roll
2 - Weld Pressure Units
2 - Single Scarfing Stands
1 - Bead Winder
1 - Westinghouse 60 KW High Frequency Welder - Rebuilt

SIZING MILL:	

5 - Driven Sizing Stands
1 - 6 Pass Straightener - 3 Vertical - 3 Horizontal
1 - CAT Capstan Pull Out Station
1 - Straightener Unit 
1 - Driven Pre-Oval Pass
5 - Idle Pre-Oval Passes

CUT-OFF:	1 - Livernois Flying Cut-Off System

MILL DRIVE:50 HP DC Reliance Solid State Drive

DRAWINGS:

1 - Complete Set of Electrical and Mechanical Drawings.  All Necessary
	Installation Drawings.
1 - All Necessary Catalogs For All Equipment Purchased With this Line.

TOOLING:		Round .431"

CONDITION:	Very Good

NOTE:	This Machine Manufactured a Radiator Tube With The Outside
		Dimensions of .110" x .635" With a Wall Thickness of .016" at 400 FPM.