3" (76.2mm) x .125" (3.2mm) Abbey Etna 2KU, HF, 300 FPM, Reconditioned in 1999

SPECIFICATIONS:

Maximum Tube Diameter:		3.0" (76.2 mm)
Minimum Tube Diameter:		.500" (12.7 mm)
Maximum Wall Thickness:		.125" (3.2 mm)
Minimum Wall Thickness:		.018" (.46 mm)
Maximum D/T Ratio:			60:1
Minimum D/T Ratio:			10:1
Maximum Material Yield:		50,000 PSI
Maximum Mill Speed:			300 FPM (91 M)
Roll Space Forming:				10" (254 mm)
Roll Space Fin & Sizing:			5" (127 mm)
Roll Root Diameter:				4.75" (120.6mm)
Driven Spindle Diameter:		2.00" (50.8 mm)
Hand of Operation:				Left to Right

Gear Box Data:
Worm Ratio:					6:1 High Speed Gearing
Breakdown Ratio:				No. 1 (1.4:1) No.2 (2.0:1) No.3 (2.5:1)
Fin & Sizing Ratio:				1:1					

Date of Manufacture:			Tube Mill - 1978
Reconditioned:					1999

ENTRY EQUIPMENT:

1 - 6,000 Lb. Double Uncoiler, Model 60-12
     Maximum Coil O.D.: 60" (1524mm)
     Coil I.D Range:  16"-20" I.D. (406-508mm)
1 - GUILD Shear End Welder, Complete Self-Contained
1 - LOOPCO Overhead Strip Accumulator System
	4 Strand Type Accumulator
	Approximately 200' Long 
	Approximately 1,000' Strip Storage

FORMING MILL:

1 - ABBEY ETNA #2K3.0 Forming Mill
	Serial Number: (1978)
	1 - Idle Two Roll Edge Guide
	1 - Idle Marking Stand
	3 - Pass Edge Trimming Stock Guide
	3 - Breakdown Stands
	4 - Idle Cluster Pass
	2 - Fin Stands
	1 - Idle Side Roll
	75 HP DC Drive System
	
WELDING SECTION:

1 - INDUCTRON High Frequency Welder, 150 KW
	1 - 3 Roll Weld Pressure
	1 - Lead Roll Seam Guide
	1 - Dual Scarfing Unit

COOLANT SECTION:	

1 - ABBEY ETNA 20' Coolant Zone

SIZING MILL:

1 - ABBEY ETNA Sizing Mill
	Model #2K3.0 (1978)
	3 - Sizing Stands
	3 - Idle Side Rolls
	1 - Turkshead, 4 Roll
	3 - D.C. Motors 30 HP each, 1150 RPM, Horsburgh Scott Gearboxes

CONDITION:	Excellent, Reconditioned our Shop 1999