2-1/2" x .125" ABBEY ETNA #2K, 600 AMP TIG , 50 FPM, Complete, 1989, Like New

SPECIFICATIONS:
	Maximum Tube Diameter:			2-1/2 "  (63.5 mm)
	Minimum Tube Diameter:			.500" (12.7 mm)
	Maximum Wall Thickness:			.125"  (3.2 mm)
	Minimum Wall Thickness:			.018"  (0.5 mm)
	Maximum D/T Ratio:				60:1
	Minimum D/T Ratio:				10:1
	Maximum Material Yield:			50,000 PSI
	Maximum Mill Speed:				50 FPM  (15 M)
	Roll Space (Width) Forming:			9.000" (228.6 mm)
	Roll Space (Width) Fin & Sizing:		4.500" (114.3 mm)
	Driven Spindle Diameter:			2.0" (50.8 mm)
	Worm Gear Ratio:					24:1
	Hand of Operation:					Left to Right
	Date of Manufacture:				1989
	Start up date:						1990

ENTRY LINE:
  	
	1- Littell Double 4000 Lb. Uncoiler, Model 40-12, 20"-24" ID, 60"OD
	1- New, Guild Model PSA Shear End Welder, Complete
	1- Automatic Ultrasonic Strip Washing System, Branson series 7000 Generator 

FORMING MILL:	

	1-  Entry Guide Unit 
	3-  Driven Breakdown Stands
	4-  Idle Side Roll Units (Cluster unit)
	2-  Driven Fin Stands
	1-  Idle Side Roll Unit

WELDING SECTION:             

	1- Side Closer Seam Guide Unit
	1- New Rofin-Sinar Laser Welder, 4000 Watt, Model RS-840HF
	2- Roll Weld Pressure Unit (double unit)for Laser
		
COOLANT SECTION:	1- 10 Ft. Coolant Zone Flood Type

SIZING MILL:

	1- Acme Double flap wheel grinder, with dust collection system, Model G4
	3- Driven Sizing Stands
	3- Idle Side Roll Units
	1- Straightener Unit (Modified Turkshead)
	1- MAC Eddy Current Tester, with coil mount

CUT-OFF SAW:

	1- Abbey Etna flying friction saw 		
 	1- Digital Length Control System
	1- Dust collection system	

MILL PASS ARRANGEMENT:
	
	Driven Breakdown			Side Closer, Seam Guide
	Driven Breakdown			2-Roll Weld Pressure (Double Unit)
	Driven Breakdown			Acme Flap Wheel Grinder
	Idle Side Roll					Idle Side Roll
	Idle Side Roll					Driven Sizing
	Idle Side Roll					Idle Side Roll
	Idle Side Roll					Driven Sizing
	Driven Fin						Idle Side Roll
	Idle Side Roll					Driven Sizing
	Driven Fin						Idle Straightener (Modified Turkshead)

MOTORS:

	1- 10 HP Forming Motor DC
	1- 10 HP Sizing Motor DC 
	1- 7.5 HP Cut-Off Saw 
	2-   2 HP Flap Wheel Grinder

DRIVE SECTION:

	1- Reliance Solid State DC drive system, rated capacity of 36 HP
		460 Volt, 3 Phase, 60 Hertz
		46 AMP
		S.O. 1WS867025
		Model S6RM




CONDITION:  Like New, was used for testing.