2-1/2" x .134" ABBEY ETNA #2KU ReducingType, 150 KW HF, 275 FPM, 1962

Age:			1962
Serial Number:	240

MILL SPECIFICATIONS:

Maximum Tube Diameter:		2 1/2" (63.5mm)
Minimum Tube Diameter:		1/2" (12.7mm)
Maximum Wall Thickness:		.134" (3.4mm)
Maximum DT Ratio:				60 to 1
Minimum DT Ratio:				10 to 1
Maximum Material Yield:		55,000 PSI
Maximum Mill Speed:			275 FPM (90MPM)
Roll Space Forming:				10" (254mm)
Roll Space Fin & Size:			4" (101mm)
Spindle Diameter:				2-1/2" (63.5mm)
Hand Of Operation:				Left to Right

ENTRY EQUIPMENT:

1 - 8,000 (4 Ton)Cooper Weymouth Double Uncoiler
1- GUILD Shear End Welder (UK Built)

FORMING MILL:

1 - Entry Guide Unit
3 - Driven Break Down Stands
4 - Idle Side Roll Units (Cluster Unit)
2 - Driven Fin Passes
1 - Idle Side Roll (Between Fins)


WELDING SECTION:

1 - (2) Roll Weld Pressure
1 - Lead Roll Seam Guide
1 - Dual Scarfing Stand
1 - 15' Coolant Zone

SIZING MILL:

5 - Driven Sizing Stands
5 - Idle Stand Roll Units

CUT-OFF PRESS:

1 - Beta Ram Model OA 35-1FD Reclined S/N E22 Double Cut
1 - Talleyrand Digital Length Control System, 2 Batch 	  Controller

MOTORS:
	
1 - Forming Motor 75 HP DC (57KW)
5 - Sizing Motors, 7-1/2 HP DC (6KW)


TOOLING: 
Note: May Be Incomplete, Inspection Required

1.250" (31.7 mm), 1.500" (38.1 mm), 1.750" (44.4 mm), 2.00" (50.8 mm),
2.50" (63.5 mm)

Condition:		Very Good (Reconditioned 1998)