For info:
UTREC NUMBER: 837 MANUFACTURER: ABBEY ETNA MODEL NUMBER: 2K SPECIFICATIONS: Maximum Tube Diameter: 2-1/2" (63.5 mm) Minimum Tube Diameter: .500" (12.7 mm) Maximum Wall Thickness: .125" (3.2 mm) Minimum Wall Thickness: .018" (0.5 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 50 FPM (15 M) Roll Space (Width) Forming: 9.000" (228.6 mm) Roll Space (Width) Fin & Sizing: 4.500" (114.3 mm) Driven Spindle Diameter: 2.0" (50.8 mm) Worm Gear Ratio: 24:1 Hand of Operation: Right to Left Date of Manufacture: 1973 ENTRY LINE: 1- Littell Single 6000 Lb. Uncoiler, Model 60 FORMING MILL: 1- Entry Guide Unit 3- Driven Breakdown Stands 4- Idle Side Roll Units (Cluster unit) 2- Driven Fin Stands 1- Idle Side Roll Unit 1- 10 HP D.C. Motor WELDING SECTION: 1- Seam Guide Unit 1- 400 Amp Miller Gold Star TIG Welder 2- Roll Weld Pressure Unit 1- Cyclomatic Magnetic Arc Control (for adjusting arc across up & down seam) 2 - Driven Weld Seam Flattening Stands COOLANT SECTION: 1- 8 Ft. Coolant Zone Flood Type SIZING MILL: 1- Acme Double flap wheel grinder, with dust collection system, Model G4 3- Driven Sizing Stands 3- Idle Side Roll Units 1- Straightener Unit (Modified Turkshead) 1- 10 HP D.C. Motor CUT-OFF SAW: 1- Flying Friction Saw 1- Length Control System 1- Dust Collection System 4 - Boxes Extra Blades 18' Runout MILL PASS ARRANGEMENT: Driven Breakdown Seam Guide Driven Breakdown 2-Roll Weld Pressure Driven Breakdown Acme Flap Wheel Grinder Idle Side Roll Idle Side Roll Idle Side Roll Driven Sizing Idle Side Roll Idle Side Roll Idle Side Roll Driven Sizing Driven Fin Idle Side Roll Idle Side Roll Driven Sizing Driven Fin Idle Straightener (Modified Turkshead) DRIVE ELECTRICS: 1- Reliance Solid State DC Drive System 1- 10 HP Forming Motor DC 1- 10 HP Sizing Motor DC 1- 7.5 HP Cut-Off Saw 2- 2 HP Flap Wheel Grinder CONDITION: Very Good