For info:
Used REMS ADM96 Automatic Cutting and Chamfering Machine Year: 1986 Stock No. 7229 Specifications: Working Range: 8-50 mm (0.32"- 2") dia. Chip forming 8-90 mm (0.32" - 3.5") dia. Chip forming and chipless Cutter-head speeds:infinitely adjustable 100-1000 rev/min Chamfering speed: 25-1200 rev/min Tool feed: 0 - 0.3 mm / rev. Length Stop: 5-500 mm (.196" - 19.7") Electrics: Spindle Drive: 5.0 kW (6.8 HP) Hydraulic motor: 4.0 kW (5.5 HP) Chamfer motors: 2 ea - 2.5 kW (3.5 HP) Coolant pump: 0.5 kW (0.7 HP) Bar feed motor: 0.5 kW (0.7 HP) Loading magazine: 0.8 kW (1.0 HP) Voltage: 460 volt, 3 phase, 60 hz - 34 Amps Overall Dimensions: Cut-off & Chamfering unit: 84" long x 75" wide x 80" high 5300 lbs. Loading Magazine: 18 ft. long x 3 ft. wide x 4-½ ft. high 1825 lbs. Switchgear Cabinet: 48" long x 16" wide x 75" high 836 lbs. Features: " The spindle drive of the cut-off machine and chamfering are powered by their own motors. " Stock clamping, tool feed, work piece removal and transfer, and also the clamping devices and feed of the the end working facility are hydraulically controlled by and electric/electronic program circuit " The hydraulics are driven by a separate unit " The program sequence is governed by a stored program control "SPS". " An error diagnostic display in the control panel indicates any faults occurring and allows them to be pinpointed easily and immediately. " An assortment of collets, clamping jaws and cut-off and chamfering tools are included with the machine - can be cataloged upon inspection.