For info:
1-USED WILLIS RD1100 BIG BEAR RADIAL DRILL MACHINE SERIAL NUMBER TY9803001 DATE OF MFG 1998 STK#102326 ========================================= SPECIFICATIONS SUBJECT TO VERIFICATION: Specifications: RD1100 Driling cap. in steel 1-3/4" Drilling cap. in cast iron 2-1/8" Column dia. 11-3/4" Max. distance column to spindle center 45" Min. distance column to spindle center 13" Horiz. travel of head 32" Max. distance from spindle to base 48" Min. distance from spindle to base 28" Box table, dimensions, LxWxH 25-3/4x19-3/4x16" Spindle taper MT #4 Quill travel 9-1/2" Spindle speeds (12) 44-1500 Feed rates IPR (3) 0.002-0.006 Spindle HP 5 Elevating motor HP 2 Coolant pump HP 1/8 Condition appears excellent. Featuring: Willis Radial Drill with Hardened & Ground Steel Gears running in an oil bath Double Wall Column rotates 360 degrees (3) Power feed Rates can be changed while the drill is running Arm is raised & Lowered by Independent Motor with Safety Nut to protect arm from dropping Head moves Horizontally on the arm on bearings that run on hardened steel wear strip Head operator panel includes start button, E-stop button, 4 way switch to raise and lower arm, spindle forward/reverse, ammeter, coolant pump switch and worklight switch Column Diameter - 11-3/4" Horizontal head Travel - 32" Overall Height (floor to top of column) - 86" Spindle Stroke - 9-1/2" Spindle Speeds (12) - 44-1500 Spindle HP - 5 Drilling Capacity - 1-3/4" Max. Distance Spindle Center to column - 45" Max. distance Spindle Nose to base - 48" Base Dimensions - 28" x 72" x 7" Spindle Taper - MT #4 Spindle Feeds (3)0.002-0.006 ipr Box Table, 25-3/4 x 19-3/4 x 16" Work Light Coolant Pump with reservoir in the base Arm elevating motor - 2 HP Emergency Stop, Low Voltage Controls Net Weight - 4600 Lbs www.rabind.com 586-752-0090