For info:
Mitsubishi Wire EDM Model FA10S Max. workpiece dimensions (in) .................. 31.4 x 23.6 x 8.4 Workpiece weight (lbs) .......................... 1,100 Table dimensions (in) ........................... 23.2 x 20.2 Machining range (in) ............................ 13.7 x 9.8 x 8.6 U/V travel (in) ................................. 1.25 x 1.25 Taper Angle ..................................... 15° @ 4.0 Resolution (in) ................................ .000002 (2 Millionths) Table rapid feed (in / min) ..................... 51.2 Wire diameter (in) .............................. .004-.012 (.010 Std) Minimum wire thread start hole (in) ............. .020 Maximum workpiece AT height (in) ................ 8.6 Wire tension (g) ................................ 50 ~ 2500 Wire spooling speed (in / sec) .................. 0 ~ 11.8 Filter tank capacity (gallons) .................. 116 Dielectric system dimensions (in) ............... 40.1 x 60.6 x 59.1 Dielectric system weight (lbs) .................. 770 (empty) Machine dimensions (in) ......................... 62.0 x 65.6 x 75.9 Machine weight (lbs) ........................... 4,400 Equipped With: Submerged machining Automatic Fluid Level Control Vertical Movement Machining Tank Door Fine grain Dianite casting material Moving Table Design DC-Servo (Closed Loop) Torque Control Wire Tensioning System Direct Drive 25mm Ball Screws Linear Motion Guide Ways New Digital 500 Watt AC Servo Drive System All-Axes Absolute Control System Linear Glass Scales Fine Resolution Encoder Feedback 16-Step Programmable Flushing Control Mitsubishi Wire EDM Model FA10S