Daewoo Puma TT2500MSY (2004), Twin Spdl. 8 Axis CNC lathe,

Daewoo Puma TT2500MSY (2004)

MAIN SPINDLE DIRECTION Horizontal 
TURNING DIAMETERS.......... NOMINAL:10.000 "................. MAXIMUM:15.400 " 
TURNING LENGTHS.............NOMINAL:13.800 "............. ....MAXIMUM:13.800 "  
MAXIMUM SWING ................................................31.500 " 
CHUCK DIAMETER..............STANDARD:8.000 "..................MAXIMUM:12.000 " 
COLLET TYPE/CAPACITY --  
BAR CAPACITY................STANDARD:3.000 "  

WORK SUPPORT COMPONENTS 
MULTI-SPINDLE: No
NUMBER OF MAIN SPINDLES: 2 

HEADSTOCK - SPINDLE 1
NOSE...........................................................A2-8  
BORE...........................................................3.500 "  
SPEED..........................................................3500 RPM  
DRIVE MOTOR (HP)...............................................34.9  
  
HEADSTOCK - SPINDLE 2 
NOSE...........................................................A2-8  
BORE...........................................................3.500 "  
SPEED..........................................................3500 RPM  
DRIVE MOTOR (HP)...............................................34.9  
 
TOOLING / WEIGHTS / MEASURES TOOLING PRIMARY SECOND 
TYPE........................Primary:Upper Turret...............Second:Lower Turret  
MAX. NUMBER OF TOOLS 
TURNING.....................Primary:12.........................Second:12  
ROTARY......................Primary:12.........................Second:12  
TOOL SHANK SIZE (inches) 
SQUARE......................Primary:1.000".....................Second:1.000 " 
ROUND.......................Primary:1.600".....................Second:1.600 " 
ROTARY......................Primary:0.750".....................Second:0.750 " 
ROTARY TOOLING 
HORSE POWER (30 MIN.).......Primary:7.4........................Second:7.4  
RPM.........................Primary:4000.......................Second:4000  
ON-CENTER MILL DRILL...........................................Standard 
WITH 'C' AXIS..................................................Standard 
OFF-CENTER MILL DRILL..........................................Standard 
WITH 'Y' AXIS..................................................Standard 

MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS: 2 
FLOOR LAYOUT: 
LENGTH.........................................................159 " 
WIDTH..........................................................87 " 
HEIGHT.........................................................98 "
 
AXIS SPECIFICATIONS 
Std. No. Axes: 8 AXIS    TRAVEL              TRAVERSE               RATE FEED RATE 
X1 (Std.)................10.000 Inch...........787 IPM..................197 IPM 
Z1 (Std.)................31.500 Inch...........944 IPM..................197 IPM 
C1 (Std.)................360.000 Deg...........200 RPM..................200 RPM 
Y1 (Std.)................4.700 Inch............195 IPM..................197 IPM 
B1 (Std.)................31.900 Inch...........944 IPM 
X2 (Std.)................7.500 Inch............787 IPM..................197 IPM 
Z2 (Std.)................35.400 Inch...........944 IPM..................197 IPM 
C2 (Std.)................360.000 Deg...........200 RPM..................200 RPM 

Equipped with the Following:
(2) Spindles
(2) Turrets
Full Y axis
Fanuc 18iTB
(2) 10" Chucks
(2) 12" Station Turrets
Tool Probe
Full C Axis on both Spindles
(7) Live Milling/Drilling Tool,(4) Straight (3) Right Angle
Chip Conveyor & Parts Conveyor
Barfeeder-Model Bartec Rapid Feed 896 Mini 
Cool Jet High Pressure-1,000 PSI

Hours
Cut - 5455
Operating - 6,616
Power-On - 18,499

Scroll Down for Pictures