Studer S40-4 Cylindrical Grinder CNC

Studer S40-4 Cylindrical Grinder CNC 

Swing Over Table .......................... 13.8" 
Center Height ............................. 6.9" 
Distance Between Centers .................. 39.4" 
Weight Capacity Between Centers ........... 290 Lbs 
Grinding Wheel Diamter, Standard .......... 16" 
Grinding Wheel Width, Standard ............ 3.25" 
Grinding Wheel Hole Diameter .............. 5" 
Table Longitudinal Slide Travel ........... 41.37" 
Maximum Wheelhead Slide Travel ............ 10.8" 
Maximum Table Swivel Angle ................ 8.5 Degrees 
Workhead Swivel Range ..................... 0 - 90 Degrees 
Tailstock Center Taper .................... #3 MT 
Workhead Center Taper ..................... #5 MT 
Grinding Wheel Speeds ..................... 1,670 & 2,110 RPM 
Workhead Spindle Speed Range .............. 30 - 750 RPM 
Table Longitudinal Feed ................... 394 IPM 
Wheelhead Motor ........................... 10 HP 

Net Weight (Approximate): 8,800 Lbs 
 
Equipped With: 

Siemens Sinumerik Control
Full Enclosure 
Coolant Chiller
Cylclotron Coolant Filtration System
Worklight 

**** See a video of this macine under power on our website at
     http://www.concordmachinery.com/videos.html ****


Studer S40-4 Cylindrical Grinder CNC