DAEWOO PUMA V-550 CNC VERTICAL TURNING CENTER

USED DAEWOO PUMA V-550 CNC VERTICAL TURNING CENTER  
NEW-2004

CONTROL TYPE...........................: FANUC 21iTB
MAXIMUM SWING..........................: 31.5"
MAXIMUM TURNING DIAMETER...............: 28.7"
MAXIMUM WORK LENGTH ...................: 29.5"
SPINDLE NOSE ..........................: ASA-A2-11
TURRETS POSITIONS......................: 10
TURNING TOOL SHANKE MAX. ..............: 1.25" SQUARE
TOOL SELECTION ........................: BI DIRECTIONAL
BORING BAR DIAMETER....................: 2.5"
SPINDLE SPEEDS.........................: 20-2000 rpm
SPINDLE DRIVE..........................: 50HP AC
X AXIS TRAVEL .........................: 15.4"
Z AXIS TRAVEL .........................: 31"
X AXIS GUIDEWAY SPAN ..................: 15.2"
Z AXIS GUIDEWAY SPAN ..................: 24.8"
MAX. FEED RATES .......................: 236 IPM
X AXIS RAPID TRAVERSE .................: 472 IPM
Z AXIS RAPID TRAVERSE .................: 630 IPM
VOLTAGE ...............................: 220V @ 141 AMPS
DIMENSIONS.............................: 75" L x 107" W x 128" H
MACHINE WEIGHT ........................: 19,850 LBS.

EQUIPPED WITH:

COOLANT
ENCLOSURE