36 Ton Euromac Digibend 360 Horiz, programmable control w/ 100 job memory, 9.80" stroke length, 7.5" max bend height, 4 HP, adjustable length gauge (1995)

USED EUROMAC 36 TON HORIZONTAL BENDER WITH PROGRAMMABLE CONTROL
MODEL DIGIBEND 360
YEAR:  1995
Stock No.  7364

Specifications
Working force:	36 ton
Length of stroke:	9.80"
Strokes per minute at 1" stroke:	50
Motor:	4 HP,  480 volt,  3 phase
Work surface area:	46.80" x 22.62"
Table:	48.75" width x 25.35" length x 44.46" height
Maximum bending height:	7.50"
Bending capacity (standard die):	0.86" mild steel
	0.98" copper
Oil required:	16 gallons
Approximate weight:	2,000 lbs.

Equipped with:
"	Radius Bending Punch
"	6" V Die
"	Adjustable length gauge
"	Automatic control panel
"	Programmable ram stroke
"	Programmable bend sequence
"	Work piece counter
"	Hydraulic powered
"	Generate full tonnage at any point in the stroke
"	Ability to job ram
"	Reverse ram at any point in the stroke
"	Adjustable working pressure
"	Monoblock construction
"	Hydraulic cylinder is permanently integrated into a solid Meehanite steel
     casting for accuracy and reliability
"	Programmable Control
"	Holds 100 programs for quick set up
"	Bending sequencing possible
"	Can be programmed for automatic slow down at bend point for increased accuracy
"	Glass scale for accurate position sensing
"	Two tool locator pins and positive clamp lock for single pin bending punch
"	Allows quick tooling set-up and change-over of tooling ensures proper tooling alignment
"	All working parts are hardened and ground to ensure accuracy of tool alignment and ram travel