Giddings & Lewis HMC170 Horizontal CNC Machining Center

Giddings & Lewis HMC170 Horizontal CNC Machining Center w/ Full 4th Axis  

Control ...................... Fanuc 160Mi with Intelligent Terminal 3

Capacities:

X Axis Travel ............................... 31.49"
Y Axis Travel ............................... 31.49"
Z Axis Travel ............................... 31.49"
Maximum Workpiece Swing ..................... 35.4"
Maximum Workzone Height ..................... 43.3"
Distance Centerline to Pallet Surface ....... 5.9"
Distance Spindle Nose To Pallet Centerline .. 5.1"

NC Rotary Table:

Pallet Size ................................. 24.8" x 19.7"
Allowable Load .............................. 2,205 lbs.
Number of Positions ......................... 360,000
Positioning Accuracy A  ..................... 7 Arc Sec
Positioning Repeatability ................... 5 Arc Sec
Pallet Change Time (approx.) ................ 10 Sec

Spindle:

Power (Continuous/S 6-40%) .................. 50/61.5 HP
Spindle Speed ............................... 25 - 10,000 RPM
Spindle Torque (Continuous/S 6-40%) ......... 664/833 Ft. lbs.
Spindle Taper ............................... #50 ANSI B5.50
Diameter of Front Bearing ................... 3.9"
Coolant Through Spindle ..................... 1015 PSI

Feed Rate/Rapid Traverse:

Feed Rate/Rapid Traverse X/Y/Z .............. 1417 IPM
Thrust (Continuous/S 3-40%) Y/Z-Axis ........ 5,620 lbs.
Rapid Traverse B-Axis ....................... 30 RPM
Acceleration (approx.) ...................... .4 G

Tool Magazine:

Maximum Number of Cassettes ................. 4
Tools Per Cassette .......................... 50
Tool Diameter (Full/Empty Adjacent) ......... 4.9"/12.8"
Tool Length ................................. 25.6"
Tool Weight ................................. 88 lbs.
Cassette Load (50 Tools) .................... 1,322 lbs.
Traverse Speed Of Tool Exchange ............. 525 Ft/Min.
Tool-to-tool Change Time (over 25 kg) ....... 4.5 Sec
Chip-to-chip Change Time (over 25 kg) ....... 8 Sec

Standard Features:

Complete Machine Enclosure
Preparation For Oil & Mist Extractor
Lighting For Electrical Cabinet
Coolant Thru Spindle 50 Bar (725 PSI)
Coolant Shower In Work Area
(2) Chip Conveyors for X-Axis
(1) Chip Conveyor for Z-Axis
180 Rotary Pallet Changer
4 x 90 Index Positioning At Load/Unload Station
(2) 19.68" x 24.80" Pallets With T-Slots

Additional Features:

NC Rotary Table - 360,000 Positions
10,000 RPM Spindle
Wire Identification
Isolation Transformer (For Non-Grounded Installations)
Hydraulic Fixture Interface, 70 BAR 1,015 PSI
Touch Probe

Additional Fanuc 160Mi Control Options:

Built In Floppy Disk Drive
Fanuc Documentation On CD
Fanuc "Flash Card" Back Up 2nd Operating System
Drawings & Documentation on CD
DNC 2 Fanuc Option with RS232 Interface
Part Program Storage - 640 Meters
Eight Digit Part Program Number
Background Editing
Expanded Part Program Editing
Tool Offset Geometry and Wear w/ Separate D & H Codes
Tool Offsets - 400
Tool Length Measurement
Additional Custom Macro Common Variable
Helical Interpolation
Programmable Data Input - G10
Tool Retract & Recover - G10.6
Third & Fourth Reference Point Returns - G30
48 Additional Workpiece Coordinate Systems
Rotary Table Fixture Compensation - G54.2
Coordinate System Rotation - G68, G69
Inverse Time Feed - G93
Additional Reader/Punch Interface
Remote Manual Pulse Generator

Operating Voltage: 460 Volts, 3 Phase, 60 Hz
Overall Approx. Weight: 50,000 lbs.

Full 4th Axis Giddings & Lewis HMC170 Horizontal CNC Machining Center